Still seaching for a Cruise master switch.

ceedy · 3rd August 2009, 11:53

After getting a Cruise ECU, from a Member in Spain, ( thanks Elisio)..

Still need the final Bit .. master switch.

Tried so many breakers .. with no success.

Anyone know if its ok to stick the current bits in the ZT without any problems

then twist a few wires together, ram in a 13amp light switch ??

.

Not really but I cannot find out what type of switch it is ??
multi pin, momentary, latching ???
just to see if there's any alternative I could use.

Chris.

The_Monk · 3rd August 2009, 12:22

I have one I think... let me check and get back to you...

Begiorlegi · 3rd August 2009, 16:35

I've taken the switch out from the dash, and I dunno you can find something like this. If you have fitted the wiring loom you have only to plug the switch in the YPC connector.

Regards.

ceedy · 3rd August 2009, 17:56

Quote:

Originally Posted by Begiorlegi

I've taken the switch out from the dash, and I dunno you can find something like this. If you have fitted the wiring loom you have only to plug the switch in the YPC connector.

Regards.

Many thanks Elisio, top info will certainly give me a bit of a clue

take care
Chris

FROGGY · 3rd August 2009, 19:56

Chris

Why don't you just buy a new one? They are not that much.

Or is that a silly question?

Mick

David3807 · 3rd August 2009, 20:11

£21.89 + Vat

ceedy · 3rd August 2009, 20:56

Quote:

Originally Posted by David3807

£21.89 + Vat

just found that out .. was just about to tomorrow

... but .. along came another just in time

3rd August 2009, 11:53	#1
ceedy This is my second home All Trophy Blue ,ZT260#50 , ZT CDTI Auto, ZR105+ and 1.8T Firefrost spoiling the Set . Join Date: Nov 2006 Location: Nr Sherborne But in Somerset.. Posts: 6,077 Thanks: 916 Thanked 1,214 Times in 768 Posts	Still seaching for a Cruise master switch. After getting a Cruise ECU, from a Member in Spain, ( thanks Elisio).. Still need the final Bit .. master switch. Tried so many breakers .. with no success. Anyone know if its ok to stick the current bits in the ZT without any problems then twist a few wires together, ram in a 13amp light switch ??. Not really but I cannot find out what type of switch it is ?? multi pin, momentary, latching ??? just to see if there's any alternative I could use. Chris. __________________ The Three Bloo's Wifey's Zr105, MY CDTI & 260 #50 and Number One sons 1.8T in Firefrost When I were a lad Zero to 142 in 10.25 secs at the Pod on my Blown Norton. 210 Kart Champ in 70's

3rd August 2009, 19:56	#5
FROGGY I really should get out more....... MG ZT CDTI Join Date: Sep 2007 Location: 17500 REAUX, CHARENTE-MARITIME Posts: 2,749 Thanks: 2 Thanked 133 Times in 90 Posts	Chris Why don't you just buy a new one? They are not that much. Or is that a silly question? Mick __________________ http://i200.photobucket.com/albums/a...ps628d4119.jpg IN THE BLACK NOW

3rd August 2009, 12:22	#2
The_Monk I really should get out more....... - Join Date: Nov 2006 Location: - Posts: 2,586 Thanks: 0 Thanked 3 Times in 2 Posts	I have one I think... let me check and get back to you...

3rd August 2009, 16:35	#3
Begiorlegi Kingdom of Navarre Rover 75 Join Date: Jan 2009 Location: Tudela/Muskaria Posts: 190 Thanks: 2 Thanked 2 Times in 2 Posts	I've taken the switch out from the dash, and I dunno you can find something like this. If you have fitted the wiring loom you have only to plug the switch in the YPC connector. Regards.

3rd August 2009, 20:11	#6
David3807 Posted a thing or two 2002 R75 Conn SE 2.5l Auto Tourer, 2001 R75 Conn SE 2.5 Auto Saloon Join Date: Nov 2006 Location: Gravesend Posts: 1,897 Thanks: 0 Thanked 2 Times in 2 Posts	£21.89 + Vat