Luk repset clutch kit

wullie480 · 23rd July 2017, 20:46

Well as I finish for my holidays & the clutch has gone it's slipping badly so needs replaced asap. I'll be stripping tomorrow and hopefully can get a clutch same day as I see Euro has one in stock or I can maybe get one next from car parts4less.

Anyone know anywhere cheaper than the above?

I've only quickly checked for a zt but the td4 also fits iirc and maybe cheaper

John Armstrong · 23rd July 2017, 21:22

I replaced my clutch about 2 years ago with a TD4 assembly from the same source parts4less and it's holding up fine. Also got a new Slave therefrom
cheers
John

DMGRS · 24th July 2017, 08:14

The LUK kit is fine, and perfectly up to the job.
We sell a lot of LUK slave cylinders, and these days they seem very reliable.

If you can hang on for a day, we have a couple of options available to you for delivery tomorrow morning:
OEM-Q - https://www.dmgrs.co.uk/products/bud...1069-uub105301
Borg & Beck & LUK / Metal Slave Cylinder - https://www.dmgrs.co.uk/products/bor...1069-uub105301

Forum discount of 5% with code FORUM5 of course applies to either, too.

wullie480 · 25th July 2017, 07:41

Cheers Matt I'll keep it in mind if I decide to repair as for the moment I've decided not to go ahead and went yesterday to look at some newer cars, however I don't know what to get

The Rovering Member · 25th July 2017, 13:47

Of course you don't. What can you possibly replace a 75 with?

wullie480 · 25th July 2017, 14:05

Quote:

Originally Posted by The Rovering Member

Of course you don't. What can you possibly replace a 75 with?

I'm open to suggestions lol

Going to have a nosey at an insignia later just to see how they are on the inside etc.

bl52krz · 25th July 2017, 18:17

THe earlier insig's were not as comfortable smooth drive as the Rover75. The later ones are more comfortable. Which would I have?........................75

wullie480 · 26th July 2017, 10:03

Quote:

Originally Posted by bl52krz

THe earlier insig's were not as comfortable smooth drive as the Rover75. The later ones are more comfortable. Which would I have?........................75

I'll find out later as I'm going for a test drive in a Vxr line 160 diesel.

cb750chris · 27th July 2017, 12:31

When I did mine recently, I used a TD4 LUK repset, from AP parts jungle (?) from ebay - this is a sister company to Andrew Page, like when I called their helpline due to a shipping error I was informed I was through to the Andrew Page Internet shopping helpline.....

So, the TD4 clutch kit fits a diesel 75 (so presumably a ZT diesel too), but was ~£70 cheaper...

Chris

DMGRS · 28th July 2017, 17:51

TD4 / 75 / ZT diesel clutches are indeed all the same.

And you can't replace a 75/ZT with something else - it's just not possible!
*looks at ZT-T lovingly through the window*

23rd July 2017, 20:46	#1
wullie480 This is my second home 1 Join Date: Dec 2010 Location: Banned Posts: 5,195 Thanks: 528 Thanked 1,022 Times in 786 Posts	Luk repset clutch kit Well as I finish for my holidays & the clutch has gone it's slipping badly so needs replaced asap. I'll be stripping tomorrow and hopefully can get a clutch same day as I see Euro has one in stock or I can maybe get one next from car parts4less. Anyone know anywhere cheaper than the above? I've only quickly checked for a zt but the td4 also fits iirc and maybe cheaper __________________ [SIGPIC][/SIGPIC]

24th July 2017, 08:14	#3
DMGRS Discount MG Rover Spares Rover 75 CDTi, 2x MG ZS180 Join Date: Jun 2011 Location: Hythe, Southampton Posts: 11,320 Thanks: 456 Thanked 3,377 Times in 2,027 Posts	The LUK kit is fine, and perfectly up to the job. We sell a lot of LUK slave cylinders, and these days they seem very reliable. If you can hang on for a day, we have a couple of options available to you for delivery tomorrow morning: OEM-Q - https://www.dmgrs.co.uk/products/bud...1069-uub105301 Borg & Beck & LUK / Metal Slave Cylinder - https://www.dmgrs.co.uk/products/bor...1069-uub105301 Forum discount of 5% with code FORUM5 of course applies to either, too. __________________ Your trusted MG Rover specialist! Tel: 02380 001133 / Email: [email protected] We now have a 'chat' function on our site for even quicker replies. Give it a try! Remember - discount code FORUM5 for 5% off

25th July 2017, 07:41	#4
wullie480 This is my second home 1 Join Date: Dec 2010 Location: Banned Posts: 5,195 Thanks: 528 Thanked 1,022 Times in 786 Posts	Cheers Matt I'll keep it in mind if I decide to repair as for the moment I've decided not to go ahead and went yesterday to look at some newer cars, however I don't know what to get __________________ [SIGPIC][/SIGPIC]

25th July 2017, 13:47	#5
The Rovering Member I really should get out more....... Rover 75 saloon Join Date: Feb 2014 Location: London Posts: 2,953 Thanks: 263 Thanked 538 Times in 431 Posts	Of course you don't. What can you possibly replace a 75 with? __________________ Reducing the size of my Rover fleet by adding a 75 to it.

25th July 2017, 18:17	#7
bl52krz This is my second home Rover 75 cdt club + Rover 2.5 KV6 Conni SE Join Date: May 2008 Location: Birmingham Posts: 11,392 Thanks: 6,587 Thanked 2,262 Times in 1,729 Posts	THe earlier insig's were not as comfortable smooth drive as the Rover75. The later ones are more comfortable. Which would I have?........................75 __________________ Great Barr, Birmingham.

23rd July 2017, 21:22	#2
John Armstrong Avid contributor Rover 75 Diesel Saloon Join Date: Feb 2008 Location: Doncaster Posts: 231 Thanks: 0 Thanked 31 Times in 28 Posts	I replaced my clutch about 2 years ago with a TD4 assembly from the same source parts4less and it's holding up fine. Also got a new Slave therefrom cheers John

27th July 2017, 12:31	#9
cb750chris Trader Rover 75 Tourer Join Date: Apr 2011 Location: Portsmouth Posts: 849 Thanks: 201 Thanked 292 Times in 200 Posts	When I did mine recently, I used a TD4 LUK repset, from AP parts jungle (?) from ebay - this is a sister company to Andrew Page, like when I called their helpline due to a shipping error I was informed I was through to the Andrew Page Internet shopping helpline..... So, the TD4 clutch kit fits a diesel 75 (so presumably a ZT diesel too), but was ~£70 cheaper... Chris __________________ Now offering T4 services in the Fareham area Replacement keys programmed / supplied / cut Diesel 135 upgrade available IPK virginisation and T4 matching available Sorry, due to a big change in home circumstances, I am unable to do any large jobs at present, but can still offer evening time diagnostics.

28th July 2017, 17:51	#10
DMGRS Discount MG Rover Spares Rover 75 CDTi, 2x MG ZS180 Join Date: Jun 2011 Location: Hythe, Southampton Posts: 11,320 Thanks: 456 Thanked 3,377 Times in 2,027 Posts	TD4 / 75 / ZT diesel clutches are indeed all the same. And you can't replace a 75/ZT with something else - it's just not possible! looks at ZT-T lovingly through the window __________________ Your trusted MG Rover specialist! Tel: 02380 001133 / Email: [email protected] We now have a 'chat' function on our site for even quicker replies. Give it a try! Remember - discount code FORUM5 for 5% off