Trim clips! Input from all members welcome. - Page 2

Typhoon190 · 16th February 2016, 19:41

Quote:

Originally Posted by DMGRS

Thanks everyone.

Safe to say, there's demand for DYC101440 and EKM100270 first and foremost.
I'll check those out tomorrow.

If any suggestions could be accompanied with a part number (if you have it to hand, of course) it'll make sure I get the right ones - as there's so bloomin' many...

Not sure what others think, but the tourer trim clip DYC101440 could do with re designing perhaps, although easier said than done. It's terrible for letting water in to the car.

Lord of Hog · 17th February 2016, 08:43

I got myself in a right old state about how and where I could lay my hands on some DYC101440 clips for fitting a replacement OS cantrail trim (the one that starts on the A pillar and runs up over the door opening to a point just forward of the C pillar). I ordered the trim from Rimmers and, on opening the box, discovered that the clips were already attached. Just as well really as I only managed to save about half of the ones that came off.

If anyone could offer a full a set of clips for our cars I'd certainly be interested.

jeremy · 17th February 2016, 09:19

When I repaired the map pockets on the back of the front seats in the Rover, I am pretty sure that I broke at least two clips, though it doesn't seem to show.

ianbstag · 17th February 2016, 16:10

Sill finisher "X" shaped clips, DDQ100460 always seem to snap.

They are still available, but are £1.75ish each, and you need 12 per side!

gazcaz · 17th February 2016, 17:32

Front windscreen clips and trim.mine being replaced and would like to buy all for new screen just incase they brake them.so i guess clips, trim, scuttle, scuttle clips.thank you

DMGRS · 17th February 2016, 22:29

Thanks guys, I'm in talks now so I'll let you know how I get on.

RugbyRover · 18th February 2016, 06:31

Don't suppose you can get hold of any of the following parts.

DDE000010PMA - Finisher assembly-waistrail-bright-rear door - Black, RH
DDE000220PMA - Finisher assembly-waistrail-bright-rear door - Black, LH

Just a thought. Rimmers prices I think are to expensive......

Thanks

Adie

DMGRS · 18th February 2016, 10:23

Quote:

Originally Posted by RugbyRover

Don't suppose you can get hold of any of the following parts.

DDE000010PMA - Finisher assembly-waistrail-bright-rear door - Black, RH
DDE000220PMA - Finisher assembly-waistrail-bright-rear door - Black, LH

Just a thought. Rimmers prices I think are to expensive......

Thanks

Adie

Hello there,
I can get them - however the prices wouldn't be much less than Rimmers, as they only really come down in quantity.

Drop me a PM, and I'll check for you later.

MikeHurley · 18th February 2016, 12:23

What about those little yellow fir trees with ball end on bump side. They clip into the wings but engage with the Bumper when it reassembled. I will try and get photo but anyone who has taken a bumper on and off will know the little thing on the wings in the S shaped shut line.

Lord of Hog · 18th February 2016, 13:02

Quote:

Originally Posted by MikeHurley

What about those little yellow fir trees with ball end on bump side. They clip into the wings but engage with the Bumper when it reassembled. I will try and get photo but anyone who has taken a bumper on and off will know the little thing on the wings in the S shaped shut line.

I know the ones you mean and I'm sure I saw an outfit in France who had them in abundance. If I can remember who they are I'll post it.

17th February 2016, 17:32	#15
gazcaz I really should get out more....... MG ZT Join Date: Nov 2014 Location: Worthing Posts: 2,744 Thanks: 3,944 Thanked 576 Times in 471 Posts	Front windscreen clips and trim.mine being replaced and would like to buy all for new screen just incase they brake them.so i guess clips, trim, scuttle, scuttle clips.thank you __________________ [SIGPIC][/SIGPIC] MG ZT 2.5 V6 234th of 2,834 Trophy Blue ZT 190 + Saloons Produced 14th of 27 MG ZTs Produced on 27-09-2001

17th February 2016, 22:29	#16
DMGRS Discount MG Rover Spares Rover 75 CDTi, 2x MG ZS180 Join Date: Jun 2011 Location: Hythe, Southampton Posts: 11,320 Thanks: 456 Thanked 3,377 Times in 2,027 Posts	Thanks guys, I'm in talks now so I'll let you know how I get on. __________________ Your trusted MG Rover specialist! Tel: 02380 001133 / Email: [email protected] We now have a 'chat' function on our site for even quicker replies. Give it a try! Remember - discount code FORUM5 for 5% off

18th February 2016, 12:23	#19
MikeHurley Gets stuck in Rover 75 Saloon 2.5 V6 Join Date: Sep 2007 Location: London Posts: 659 Thanks: 129 Thanked 26 Times in 24 Posts	What about those little yellow fir trees with ball end on bump side. They clip into the wings but engage with the Bumper when it reassembled. I will try and get photo but anyone who has taken a bumper on and off will know the little thing on the wings in the S shaped shut line. __________________ To do list: Aux Drive Belt ....... Sept 2017 Kaiser Alumium Stat Housing ....Jan 2017 Rear o/s wheel bearing set changed.....Aug 2014 Cam & Aux Belts...May 2014 Tazu Inner tie rod ends...May 2014 Need Timing Belts changed...done April 2014 Front Shocks and Strut Bearings ....done Mar 2014 Polybushes to Wishbone Arms.....done Mar 2014 Handbrake compensator changed...done Oct 2013 Exhaust Back Box a.......done 16/8/13 Quality Front Drop Links...done 16/8/13 Rear Springs ..done 16/8/13

17th February 2016, 08:43	#12
Lord of Hog Gets stuck in Rover 75 2.5 V6 in Wedgwood Blue Join Date: Dec 2015 Location: Felbridge, East Grinstead Posts: 982 Thanks: 250 Thanked 294 Times in 206 Posts	I got myself in a right old state about how and where I could lay my hands on some DYC101440 clips for fitting a replacement OS cantrail trim (the one that starts on the A pillar and runs up over the door opening to a point just forward of the C pillar). I ordered the trim from Rimmers and, on opening the box, discovered that the clips were already attached. Just as well really as I only managed to save about half of the ones that came off. If anyone could offer a full a set of clips for our cars I'd certainly be interested.

17th February 2016, 09:19	#13
jeremy Avid contributor Rover 75 Tourer Join Date: May 2013 Location: Limerick Posts: 106 Thanks: 71 Thanked 24 Times in 16 Posts	When I repaired the map pockets on the back of the front seats in the Rover, I am pretty sure that I broke at least two clips, though it doesn't seem to show.

17th February 2016, 16:10	#14
ianbstag Loves to post MG ZT 260 V8 Join Date: Aug 2013 Location: Mansfield Posts: 271 Thanks: 77 Thanked 57 Times in 49 Posts	Sill finisher "X" shaped clips, DDQ100460 always seem to snap. They are still available, but are £1.75ish each, and you need 12 per side!

18th February 2016, 06:31	#17
RugbyRover Posted a thing or two Rover 75 Tourer Join Date: Sep 2010 Location: Rugby, Warwickshire (Home of Rugby Football) Posts: 1,309 Thanks: 355 Thanked 97 Times in 72 Posts	Don't suppose you can get hold of any of the following parts. DDE000010PMA - Finisher assembly-waistrail-bright-rear door - Black, RH DDE000220PMA - Finisher assembly-waistrail-bright-rear door - Black, LH Just a thought. Rimmers prices I think are to expensive...... Thanks Adie