What I did with my Rover 75/MG ZT today? - Page 808

oxfordblue75 · 14th April 2018, 16:49

Yesterday I spent the day removing all the nuts off the fittings on the v6's premium bumper that used to be attached to the stainless surround with only one shearing. Today I have cleaned & degreased them and with the bumper laid on a workmate started bonding the fittings back on , quite easy being able to drop the trim onto the fittings to get the position right

suzublu · 14th April 2018, 17:26

Ran an oily rag over it, topped up the Smart Polish Pro Hydropel

bl52krz · 14th April 2018, 18:18

Hi Nigel. Took my Avon zv5’s off about two weeks ago, and I have found that they seem to be wearing well. Also very little outside shoulder wear on the nearside front tyre, not as bad as the Goodyear Efficentgrip does. Just fitted today, a new wood and leather steering wheel I was offered at the first Four Ashes Meet earlier this year.

trikey · 14th April 2018, 18:56

I changed a headlight bulb, and a brake light bulb on mine, then did a bit of K series work on Dawn's white one.

Andy_with_a_screwdriver · 14th April 2018, 22:25

Had the news that my Parking ticket has been successfully overturned by the independent Appeals Service Adjudicator.

One in the eye for PPS car parking people and their arrogant attitude.

I then moved a trailer load of timber and horse manure to the allotment in the sunshine.

grout20 · 15th April 2018, 08:04

Replaced my Traction Control Motor which had siezed with one from a BMW 528.

No more TC warning light. ... yeeehah!

John

versus · 15th April 2018, 11:36

Quote:

Originally Posted by hrissim

At last:

Nice, where you found?

hrissim · 15th April 2018, 13:41

Quote:

Originally Posted by versus

Nice, where you found?

From China - genuine ROEWE 750

Здравствуй, Валериу!
Оригинал

---

Fitted all of refurbished Serpents today

And URS-3 225/45/17

I like very much these rims

marinabrian · 15th April 2018, 20:33

Fitted the roof bars and took an old double bed to the tip, then took the rear seat bench out to decraminate the old lad.

Struggled yesterday to T4 Mats tourer after bleeding the clutch, there were a few things lost in translation

Brian

Madderz · 15th April 2018, 22:00

Cried a little but inside , then admitted defeat and took the car to the garage for repair

14th April 2018, 18:18	#8073
bl52krz This is my second home Rover 75 cdt club + Rover 2.5 KV6 Conni SE Join Date: May 2008 Location: Birmingham Posts: 11,393 Thanks: 6,587 Thanked 2,262 Times in 1,729 Posts	Hi Nigel. Took my Avon zv5’s off about two weeks ago, and I have found that they seem to be wearing well. Also very little outside shoulder wear on the nearside front tyre, not as bad as the Goodyear Efficentgrip does. Just fitted today, a new wood and leather steering wheel I was offered at the first Four Ashes Meet earlier this year. __________________ Great Barr, Birmingham.

14th April 2018, 18:56	#8074
trikey Premium Trader Rover 75 Join Date: Nov 2010 Location: Devon Posts: 33,767 Thanks: 8,837 Thanked 14,831 Times in 8,030 Posts	I changed a headlight bulb, and a brake light bulb on mine, then did a bit of K series work on Dawn's white one. __________________ Lest we forget..

15th April 2018, 08:04	#8076
grout20 Gets stuck in Rover 75 Connie SE 2.5 V6 Auto Join Date: Aug 2015 Location: Stevenage Posts: 619 Thanks: 619 Thanked 253 Times in 182 Posts	Replaced my Traction Control Motor which had siezed with one from a BMW 528. No more TC warning light. ... yeeehah! John __________________ . My 2.5 V6 Connoisseur SE Auto 75 is the • 20,516th 75 to be made out of 112,381 • 787th 2.5 V6 Connoisseur SE to be made out of 3,671 • 1,248th Wedgwood Blue Metallic (code: JBH) to be made out of 7,515 code JBH 75's

14th April 2018, 16:49	#8071
oxfordblue75 Gets stuck in rover 75 saloon 1.8T Join Date: Jan 2013 Location: saltash Posts: 701 Thanks: 150 Thanked 235 Times in 160 Posts	Yesterday I spent the day removing all the nuts off the fittings on the v6's premium bumper that used to be attached to the stainless surround with only one shearing. Today I have cleaned & degreased them and with the bumper laid on a workmate started bonding the fittings back on , quite easy being able to drop the trim onto the fittings to get the position right

14th April 2018, 17:26	#8072
suzublu This is my second home rover 75 1.8 vvc club se wedgwood blue Join Date: Aug 2009 Location: Seaton Carew Posts: 26,920 Thanks: 65 Thanked 7,142 Times in 4,642 Posts	Ran an oily rag over it, topped up the Smart Polish Pro Hydropel

14th April 2018, 22:25	#8075
Andy_with_a_screwdriver Gets stuck in Rover 75 Tourer CDTi Join Date: Jun 2017 Location: Plymouth Posts: 694 Thanks: 141 Thanked 153 Times in 117 Posts	Had the news that my Parking ticket has been successfully overturned by the independent Appeals Service Adjudicator. One in the eye for PPS car parking people and their arrogant attitude. I then moved a trailer load of timber and horse manure to the allotment in the sunshine.

15th April 2018, 22:00	#8080
Madderz Gets stuck in MG ZT-T Join Date: Aug 2015 Location: Barnsley Posts: 594 Thanks: 233 Thanked 132 Times in 121 Posts	Cried a little but inside , then admitted defeat and took the car to the garage for repair