Disconnected battery - No Steering wheels controls - Page 2

Stu C · 11th November 2023, 19:00

I'm posting again on this as totally baffled now. After all this time there is still no steering wheel controls working, and today plucked up the courage to take the steering wheel off and change the rotary coupler and the actual controls as well. Tried a friends double din radio and separate audio control adapter which work in his car and still nothing.

I just don't know why since the battery was disconnected first time round with everything working it's not now, even with a totally separate working radio set up it doesn't in my car

Any secret reset procedures/fuses/etc... that I could try?

Roverlike · 12th November 2023, 09:13

I would check that you have continuity on the 2 wires from steering wheel controls connector to the adapter unit. You can do that by using multimeter.

VVC-Geeza · 16th November 2023, 01:06

Have a look in settings to see if SRC is configured.My Xtrons unit recently had a new motherboard fitted and I had to input a four digit code followed by programming each SRC function separately.

See #8 on my Xtrons service agents thread just below this one.

xsport · 19th November 2023, 18:45

What radio system was fitted originally in this car ... Are you on infa red switch control system ?

11th November 2023, 19:00	#11
Stu C Loves to post MG ZT 260 Join Date: Nov 2006 Location: Telford, Shropshire Posts: 463 Thanks: 4 Thanked 12 Times in 7 Posts	I'm posting again on this as totally baffled now. After all this time there is still no steering wheel controls working, and today plucked up the courage to take the steering wheel off and change the rotary coupler and the actual controls as well. Tried a friends double din radio and separate audio control adapter which work in his car and still nothing. I just don't know why since the battery was disconnected first time round with everything working it's not now, even with a totally separate working radio set up it doesn't in my car Any secret reset procedures/fuses/etc... that I could try? __________________ 2004 MG ZT 260 SE #269 2001 MGF 1.8 Steptronic 2019 Seat Ateca Xcellece Gone but not forgotton - MG ZT 260 SE #171 Member #126

16th November 2023, 01:06	#13
VVC-Geeza This is my second home 2005 Connoisseur SE 1.8 Turbo,2004 45 1.8 Connoisseur and my beloved 1998 VVC Coupe. Join Date: Nov 2009 Location: Derby. Posts: 8,656 Thanks: 2,022 Thanked 1,016 Times in 739 Posts	Have a look in settings to see if SRC is configured.My Xtrons unit recently had a new motherboard fitted and I had to input a four digit code followed by programming each SRC function separately. See #8 on my Xtrons service agents thread just below this one. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12th November 2023, 09:13	#12
Roverlike Avid contributor Rover, few of them Join Date: Aug 2011 Location: Split, Croatia Posts: 235 Thanks: 254 Thanked 117 Times in 82 Posts	I would check that you have continuity on the 2 wires from steering wheel controls connector to the adapter unit. You can do that by using multimeter.

19th November 2023, 18:45	#14
xsport Posted a thing or two rover 75 club se Join Date: Apr 2011 Location: Leicester Posts: 1,414 Thanks: 358 Thanked 419 Times in 310 Posts	What radio system was fitted originally in this car ... Are you on infa red switch control system ?