|
||
|
19th January 2020, 07:50 | #1 |
This is my second home
Rover 75 Saloon & Tourer Join Date: Sep 2012
Location: Lincoln
Posts: 14,928
Thanks: 1,630
Thanked 3,032 Times in 2,181 Posts
|
qustions about FBH
please don't groan for yet another FBH question
I think I have understood that if I apply an earth to start the FBH but remove it after a few seconds or sooner that if I did this enough times the PCB locks out. Question 1 If, when the temperature is below zero I start the car and then 5 - 10 seconds later turn it off (just need to move car out the way) and I do this enough times, can the PCB lock out? Question 2 If the FBH in between each brief start of start up procedure, is allowed to fully start and run, will this cancel any "false" starts? macafee2 |
19th January 2020, 19:58 | #2 |
This is my second home
Rover 75 cdt club + Rover 2.5 KV6 Conni SE Join Date: May 2008
Location: Birmingham
Posts: 11,394
Thanks: 6,587
Thanked 2,262 Times in 1,729 Posts
|
Drop Trebor Or Devilish a line. They will tell you. I think that it won’t do it any harm once or twice, but you could leave it running for around ten minutes, but don’t forget it uses 40 watts. You will also probably get some white smoke out the exhaust if you stop it to quick. It runs a clearing cycle before shutting down.
__________________
Great Barr, Birmingham. |
21st January 2020, 16:38 | #3 | |||
Been round the block
75 Tourer Join Date: Apr 2009
Location: Cannock
Posts: 4,125
Thanks: 3
Thanked 189 Times in 121 Posts
|
Quote:
Quote:
Quote:
For anyone who may misunderstand or take me seriously, here are some smileys,
__________________
If at first you don't succeed, hide the evidence Last edited by Devilish; 21st January 2020 at 17:02.. |
|||
21st January 2020, 18:05 | #4 |
This is my second home
Rover 75 Saloon & Tourer Join Date: Sep 2012
Location: Lincoln
Posts: 14,928
Thanks: 1,630
Thanked 3,032 Times in 2,181 Posts
|
cheers Devilish, useful info.
macafee2 |
|
|