How can I turn the crankshaft after the head is removed?

RobRoy · 19th April 2010, 18:14

Referring to my recent post https://www.the75andztclub.co.uk/forum/showthread.php?t=58164 There was no further miracle. After much head scratching I removed the head by following advice from Haynes and positioning the crankshaft 90 degs BTDC. Examination of the pistons revealed a small piece missing from number 1 that had melted right on its edge causing complete loss of combustion. I have now ordered a replacement piston from Xpart and have clamped the liners, but, as you may have guessed I can't budge the crankshaft to a position where I can access the big end bolts on number 1 conrod. Anyone any ideas?

19th April 2010, 18:14	#1
RobRoy Regular poster Rover 75 Join Date: Apr 2007 Location: Liverpool Posts: 66 Thanks: 4 Thanked 4 Times in 4 Posts	How can I turn the crankshaft after the head is removed? Referring to my recent post https://www.the75andztclub.co.uk/forum/showthread.php?t=58164 There was no further miracle. After much head scratching I removed the head by following advice from Haynes and positioning the crankshaft 90 degs BTDC. Examination of the pistons revealed a small piece missing from number 1 that had melted right on its edge causing complete loss of combustion. I have now ordered a replacement piston from Xpart and have clamped the liners, but, as you may have guessed I can't budge the crankshaft to a position where I can access the big end bolts on number 1 conrod. Anyone any ideas?