|
||
|
29th August 2019, 19:09 | #1 |
Gets stuck in
75 Tourer CDTi Connie SE Join Date: Jun 2017
Location: Keith, Banffshire
Posts: 686
Thanks: 431
Thanked 132 Times in 105 Posts
|
seat belt height adjuster briken?
After having removed my carpets following sunroof drain leakage, I've noticed that the passenger seat belt height adjuster mechanism seems to be broken - the cables are very loose and there doesnt seem to be any springyness to the drum. is this something that cant be fixed or just simply chucked and replaced? i have a donor car with all the parts but cant remove the seats as the electrics are dead!! thanks for reading
ps does the cable come out of the carpet in the same hole as the seat wiring??
__________________
My 75 Tourer CDTi was born Saturday, 21st June 2003 @ 09:50 My 75 was the 18,749th 75 Tourer to run off the production line, out of 27,407 It was the 195th 75 Tourer CDT Connoisseur SE (135) to be made out of 2,074 and the 1,789th 75 Tourer in Wedgewood Blue Metallic (code: JEL) to be made out of 1,871 Wedgewood Blue Metallic 75 Tourers |
29th August 2019, 19:18 | #2 |
This is my second home
rover 75 1.8 vvc club se wedgwood blue Join Date: Aug 2009
Location: Seaton Carew
Posts: 26,918
Thanks: 65
Thanked 7,142 Times in 4,642 Posts
|
The cable is connected to the seat base by a hook thingy, chances are yours has disconnected itself. Simply find the end & refit it
|
29th August 2019, 19:28 | #3 |
Premium Trader
Rover 75 Join Date: Nov 2010
Location: Devon
Posts: 33,766
Thanks: 8,837
Thanked 14,831 Times in 8,030 Posts
|
If you need to replace it, it comes out of a different hole to the seat wiring (The wires exit the carpet in the same place as the rear heater vents)
__________________
Lest we forget..
|
29th August 2019, 19:32 | #4 |
Gets stuck in
75 Tourer CDTi Connie SE Join Date: Jun 2017
Location: Keith, Banffshire
Posts: 686
Thanks: 431
Thanked 132 Times in 105 Posts
|
thanks gents, I am down to bare passenger floor with the carpet out (out in 2 pieces) and hence noticed the dodgy adjuster. the driver side one was fine (even though i did forget to reconnect it at first!!) but the passenger one definitely doesnt look right with lots of floppy cable, hence my question!
__________________
My 75 Tourer CDTi was born Saturday, 21st June 2003 @ 09:50 My 75 was the 18,749th 75 Tourer to run off the production line, out of 27,407 It was the 195th 75 Tourer CDT Connoisseur SE (135) to be made out of 2,074 and the 1,789th 75 Tourer in Wedgewood Blue Metallic (code: JEL) to be made out of 1,871 Wedgewood Blue Metallic 75 Tourers |
29th August 2019, 19:56 | #5 |
Posted a thing or two
V6 2ltr auto in copperleaf +CDTI Auto in Royal Blue on loan to Son Join Date: Jul 2010
Location: Tewkesbury, Gloucestershire
Posts: 1,709
Thanks: 105
Thanked 476 Times in 267 Posts
|
Pm me your address, I'll take nearside one off my donor car. I'm off on holiday Monday until Friday, but can post Saturday or Monday morning.
Sent from my LG-M200 using Tapatalk
__________________
|
29th August 2019, 23:04 | #6 |
Gets stuck in
75 Tourer CDTi Connie SE Join Date: Jun 2017
Location: Keith, Banffshire
Posts: 686
Thanks: 431
Thanked 132 Times in 105 Posts
|
Pm sent
__________________
My 75 Tourer CDTi was born Saturday, 21st June 2003 @ 09:50 My 75 was the 18,749th 75 Tourer to run off the production line, out of 27,407 It was the 195th 75 Tourer CDT Connoisseur SE (135) to be made out of 2,074 and the 1,789th 75 Tourer in Wedgewood Blue Metallic (code: JEL) to be made out of 1,871 Wedgewood Blue Metallic 75 Tourers |
2nd September 2019, 19:02 | #7 |
Gets stuck in
75 Tourer CDTi Connie SE Join Date: Jun 2017
Location: Keith, Banffshire
Posts: 686
Thanks: 431
Thanked 132 Times in 105 Posts
|
Public thanks to David (dattrike) for sending on a spare part, incredibly kind and another example of this fantastic forum and its members at their best, helping one another out!
__________________
My 75 Tourer CDTi was born Saturday, 21st June 2003 @ 09:50 My 75 was the 18,749th 75 Tourer to run off the production line, out of 27,407 It was the 195th 75 Tourer CDT Connoisseur SE (135) to be made out of 2,074 and the 1,789th 75 Tourer in Wedgewood Blue Metallic (code: JEL) to be made out of 1,871 Wedgewood Blue Metallic 75 Tourers |
5th September 2019, 14:25 | #8 | |
Avid contributor
MG ZT-T, R75 1.8T Tourer,R75 2,5 V6 Join Date: Sep 2016
Location: Bergen
Posts: 170
Thanks: 77
Thanked 21 Times in 18 Posts
|
Quote:
I meddle with Saabs and the Saab forum guys are NO WHERE as kind and helpful as the people I have had contact with on this forum and the MGR scene
__________________
This vehicle was the 6,701st ZT-T to run off the production line, out of 8,249 This vehicle was the 82nd ZT-T 160 (1.8T) to be made out of 118 This vehicle was the 1,309th ZT-T in XPower Grey (code: LEF) to be made out of 1,673 XPower Grey ZT-Ts |
|
|
|