|
||
|
17th February 2021, 17:33 | #1 |
Newbie
Rover 75 Saloon Join Date: Feb 2021
Location: Anytown
Posts: 28
Thanks: 0
Thanked 1 Time in 1 Post
|
Key cutting issue!
Done the 'Right' thing and tried to get a key cut so I had a spare in case I lose my only one.
Used my usual guy, spent all day walking around town waiting for the call to say it's done, but noooo, the 75 isn't playing ball! Again! Anyway, short version, he rang up to say they can't code it as there is an issue with the car. He showed me when I got to his garage. He plugged in his coding equipment, and when he selects 'Keys cut' he said it should tell him which 'slot' of five my original is programmed in. The readout displayed error, not complete. He explained he can try and code he new one and guess which of the five positions to pick. He said if he picks the one that my key is programmed on, it will wipe out my old key and replace it with my new one, leaving me still with one key and £150 lighter. I said go for it, he suggested position 5, but it didn't work and wouldn't allow the new key to be programmed. He said there is a fault with the car or ECU because it isn't allowing a new key to be programmed? At least I didn't have to pay for the new key as he can re use it I assume as it hadn't been cut yet. So, where can I go from here? Will BMW have any joy? He asked me if there is any more documents with the car, and all I have is the cars key code number. Last edited by Fred Pitt; 17th February 2021 at 17:36.. Reason: Incorrect |
17th February 2021, 18:39 | #2 |
This is my second home
Roverless + 1.7D Sportage Join Date: Aug 2014
Location: East Norfolk
Posts: 7,022
Thanks: 729
Thanked 2,021 Times in 1,449 Posts
|
You need to see one of the specialists on the forum. No doubt someone will be along shortly. Key cutting is one thing but the programming of the fobs, needs the specialist equipment and parts off your motor to do it.
See this post:- https://www.the75andztclub.co.uk/for...amming+key+fob
__________________
Oil in my veins! |
17th February 2021, 18:55 | #3 |
I really should get out more.......
Rover 75 Saloon Join Date: Jul 2011
Location: Gävle
Posts: 2,516
Thanks: 395
Thanked 823 Times in 652 Posts
|
What's he trying to code? The remote board or transponder, or both? If it's the remote board then you can do it yourself with Toaf (use the search) no need to remove anything. Otherwise contact your nearest T4 trader.
Regards |
17th February 2021, 20:20 | #4 |
Newbie
Rover 75 Saloon Join Date: Feb 2021
Location: Anytown
Posts: 28
Thanks: 0
Thanked 1 Time in 1 Post
|
I'm trying to get an extra spare key, with fully working fob.
All I have is my one working one. The bloke I have always used tried but couldn't do it as when he plugged his equipment into my cars OBD port under the dash, my car wouldn't communicate with his coding system. He showed me. When he tried to code his new key, it just said error, so he couldn't finish it. He thinks there is a fault with my cars ECU or locking system. He says you can have five keys at once coded to the car, and when he tried to select slot 5, it would send it, so car wouldn't recognize the new key. I'm trying the BMW route as I do have my cars spare key code in my paperwork. |
17th February 2021, 20:26 | #5 |
Premium Trader
Rover 75 Join Date: Nov 2010
Location: Devon
Posts: 33,711
Thanks: 8,837
Thanked 14,831 Times in 8,030 Posts
|
If you fancy a trip to Bungay, I can find out which key slot your key is coded to, and then release the other slots for you.
__________________
Lest we forget..
|
17th February 2021, 20:31 | #6 |
Newbie
Rover 75 Saloon Join Date: Feb 2021
Location: Anytown
Posts: 28
Thanks: 0
Thanked 1 Time in 1 Post
|
Wow, that's great thanks.
But I wonder if you will have the same issue when you plug into my car? When could I come to you please. |
17th February 2021, 20:58 | #7 |
Premium Trader
Rover 75 Join Date: Nov 2010
Location: Devon
Posts: 33,711
Thanks: 8,837
Thanked 14,831 Times in 8,030 Posts
|
Sat or Sun is fine
__________________
Lest we forget..
|
17th February 2021, 21:06 | #8 |
Newbie
Rover 75 Saloon Join Date: Feb 2021
Location: Anytown
Posts: 28
Thanks: 0
Thanked 1 Time in 1 Post
|
Would Saturday around half four be ok, I'm working till half 2.
Thanks How much would it be? |
17th February 2021, 21:08 | #9 |
Premium Trader
Rover 75 Join Date: Nov 2010
Location: Devon
Posts: 33,711
Thanks: 8,837
Thanked 14,831 Times in 8,030 Posts
|
That's fine, cost you a packet of hob nobs
__________________
Lest we forget..
|
17th February 2021, 21:16 | #10 |
I really should get out more.......
75 CDT SE 160 Saloon Join Date: May 2017
Location: Thorpe St Andrew, Norwich
Posts: 2,630
Thanks: 1,386
Thanked 1,096 Times in 774 Posts
|
Chocolate Hob nobs !!!
__________________
Glutton for punishment --- Previously ... 2.6 SD1 x 2, 3.5 SD1, 820S, 820Si x2, 216 Gsi, 220T saloon, 414, 45 1.4 x2 and now a Cowley 75 CDT |
Thread Tools | |
Display Modes | |
|
|