|
||
|
16th August 2018, 09:12 | #1 |
This is my second home
Rover 75 Saloon & Tourer Join Date: Sep 2012
Location: Lincoln
Posts: 14,892
Thanks: 1,630
Thanked 3,032 Times in 2,181 Posts
|
Tourer rear cluster fix
seems to be a common problem that the fixings on the rear light clusters of Tourers break. this is one fix being offered on ebay
https://www.ebay.co.uk/itm/Rover-75-...AAAOSwtKNay7Fc my tourer has already had someone have a go at it and so this kit looks not to be suitable. I think Arctic did a thread that for the life of me I now can find about a fix. Here is what I am doing. Using Arctics? idea, I have bent a thin bit of metal into an L shape and drilled three holes in it, one to secure to body of the car and 2 to bolt to the damaged leg of the light cluster. I have drilled the L and already glued to the broken leg. I will get 2 small screws ( 3 or 4mm) and drill through the leg and bolt L to leg. I have a "bar" of some form of "plastic" that I have turned down in the lathe. It has a thin head on it, a shaft that I have partly sawn a slot into. This will be pushed and glued into the body of the car. I found the remaining part of the leg that would have helped hold the original screw has had to be removed because the head of my insert was proud of body and so light cluster rocked. Once the insert is glued into the body I will drill a pilot hole into the insert and then screw through my L shaped bit of metal into the insert and hopefully the light will stay in place. It is possible to push the insert out the moment but I don't intend to tighten the screw from the light cluster too tightly fingers cross macafee2 |
16th August 2018, 09:22 | #2 |
Avid contributor
Rover 75 Tourer Join Date: Jan 2014
Location: St Helier
Posts: 111
Thanks: 144
Thanked 34 Times in 24 Posts
|
There was a thread somewhere where someone had used a blanking plate from the rear of a PC case as the "L" to replace the broken tab. I followed the advice and it has been very successful. Good luck with your variant.
|
16th August 2018, 09:34 | #3 |
Posted a thing or two
rover 75 Saloon, Rover 75 Tourer Join Date: Aug 2010
Location: Hornchurch
Posts: 1,180
Thanks: 361
Thanked 79 Times in 60 Posts
|
Best person to ask
Hi,
Best person to ask is Arctic...he helped fix mine at a nano meet. Paul |
16th August 2018, 09:45 | #4 |
This is my second home
Cooper S 210 Join Date: May 2012
Location: Port William
Posts: 5,309
Thanks: 5,098
Thanked 2,406 Times in 1,631 Posts
|
__________________
Paul 2016 MINI Cooper S 210 : 2000 Rover 75 CDT Classic SE : 2009 Freelander 2 GS : 2000 Mini Cooper Sport : 1986 Mini Mayfair : 1980 Mini Pickup : 1971 Mini Cooper S |
16th August 2018, 09:54 | #5 |
This is my second home
Rover 75 Saloon & Tourer Join Date: Sep 2012
Location: Lincoln
Posts: 14,892
Thanks: 1,630
Thanked 3,032 Times in 2,181 Posts
|
The two holes on my offside that take screws, have been drilled out and so I had to fill the hole so I can re-screw the cluster in place.
Glad my memory is not failing and it was Arctic that had done a fix, in principle it was this I followed. macafee2 |
16th August 2018, 10:46 | #6 |
I really should get out more.......
MG ZT-T CDTI Auto Join Date: Feb 2014
Location: Newton Abbot
Posts: 2,624
Thanks: 1,342
Thanked 518 Times in 425 Posts
|
I bought the kit off eBay but haven't had a chance to do it yet.
I do like Arctic's version of using the blanking plates from PC's as I have plenty of those. My problem is the pesky bolts as they seem to have welded themselves due to rust and the whole fitment now rotates. My nearside light is held place with gaffa tape because I can't tighten or loosen the bolts.
__________________
Rover 75 and MG ZT: The Complete Story |
20th January 2020, 10:00 | #7 | ||
Give to Learn
Freelander 2 Join Date: Aug 2010
Location: West Midlands
Posts: 18,654
Thanks: 1,155
Thanked 6,407 Times in 3,874 Posts
|
Quote:
Link to the live thread is below, the link above is the how to thread and can not be edited by me to add missing photo's. I have since the original thread adapted another fixing for the bracket to body securing screw. https://www.the75andztclub.co.uk/for...d.php?t=140854
__________________
Arctic Givology Learn to Give Everything is Achievable ad altiora tendo. Check out our Nano meet dates http://www.midlandsnanomeets.co.uk/ http://www.the75andztclub.co.uk/index.php?thepage=howto " You do the work , we supply the expertise " |
||
Thread Tools | |
Display Modes | |
|
|