V6 Bottom Hose with bleed screw

victorgte · 11th January 2017, 17:09

I need to replace my bottom hose. The one that goes fron the bottom of the radiator and up to the thermostat. It has the bleed screw built in for the MGR procedure when refilling the system. Thanks.

Cable Tie · 11th January 2017, 17:59

Pm. Sent

victorgte · 11th January 2017, 18:04

Received thanks.

victorgte · 13th January 2017, 09:45

Still looking for one.

Typhoon190 · 13th January 2017, 22:25

In case you just need the bleed screw on it's own because it's sheered.

PYP10008L

victorgte · 14th January 2017, 13:42

Need the whole hose as the bleed screw and its fitting in the hose has been covered or blanked off. I could go digging and find that just the screw is missing but then I will left with a hose that leaks. Maybe the screw was lost hence why it was blanked off?

victorgte · 14th January 2017, 14:16

Quote:

Originally Posted by Typhoon190

In case you just need the bleed screw on it's own because it's sheered.

PYP10008L

Cheap enough so thanks for that. Might try and uncover the blanking and see if the thread is still there!

11th January 2017, 17:09	#1
victorgte I really should get out more....... MGTF, MGZT, Range Rover Join Date: Sep 2013 Location: Cheltenham Posts: 2,803 Thanks: 395 Thanked 633 Times in 446 Posts	V6 Bottom Hose with bleed screw I need to replace my bottom hose. The one that goes fron the bottom of the radiator and up to the thermostat. It has the bleed screw built in for the MGR procedure when refilling the system. Thanks. __________________ MG TF 135, MG ZT, Range Rover P38

11th January 2017, 17:59	#2
Cable Tie Regional Secretary Orange grove ztt cdti Join Date: Jan 2014 Location: Torquay Posts: 2,410 Thanks: 2,297 Thanked 1,381 Times in 818 Posts	Pm. Sent __________________ Dreams do come true

11th January 2017, 18:04	#3
victorgte I really should get out more....... MGTF, MGZT, Range Rover Join Date: Sep 2013 Location: Cheltenham Posts: 2,803 Thanks: 395 Thanked 633 Times in 446 Posts	Received thanks. __________________ MG TF 135, MG ZT, Range Rover P38

13th January 2017, 09:45	#4
victorgte I really should get out more....... MGTF, MGZT, Range Rover Join Date: Sep 2013 Location: Cheltenham Posts: 2,803 Thanks: 395 Thanked 633 Times in 446 Posts	Still looking for one. __________________ MG TF 135, MG ZT, Range Rover P38

14th January 2017, 13:42	#6
victorgte I really should get out more....... MGTF, MGZT, Range Rover Join Date: Sep 2013 Location: Cheltenham Posts: 2,803 Thanks: 395 Thanked 633 Times in 446 Posts	Need the whole hose as the bleed screw and its fitting in the hose has been covered or blanked off. I could go digging and find that just the screw is missing but then I will left with a hose that leaks. Maybe the screw was lost hence why it was blanked off? __________________ MG TF 135, MG ZT, Range Rover P38

13th January 2017, 22:25	#5
Typhoon190 This is my second home MG ZT-T 190 Monogram Typhoon Join Date: Jan 2009 Location: Oxfordshire Posts: 4,707 Thanks: 328 Thanked 557 Times in 443 Posts	In case you just need the bleed screw on it's own because it's sheered. PYP10008L