turbo bolts

david2000 · 13th January 2021, 22:00

hi to all
what socket is required to remove the bolts that bolt the turbo to the manifold 3 of STC2212A
david

trikey · 14th January 2021, 16:38

Can’t remember if it’s a m12 or m14 but whichever it is a deep multipoint socket does the job.

Sent from my iPhone using Tapatalk

tonytolle · 14th January 2021, 16:54

Quote:

Originally Posted by david2000

hi to all
what socket is required to remove the bolts that bolt the turbo to the manifold 3 of STC2212A
david

This is an odd looking bolt head ,but used elsewhere on this engine, a 12mm multi toothed socket [I'm sure there is a technical term for this but I don't know it ],fits it. The thread is 10mm. A 12mm socket with less teeth ,as some of them are ,will not fit..

13th January 2021, 22:00	#1
david2000 Loves to post rover 75 connoisseur se tourer diesel 2005 54 reg Join Date: Dec 2007 Location: ammanford Posts: 333 Thanks: 149 Thanked 20 Times in 15 Posts	turbo bolts hi to all what socket is required to remove the bolts that bolt the turbo to the manifold 3 of STC2212A david

14th January 2021, 16:38	#2
trikey Premium Trader T4 Join Date: Nov 2010 Location: Norfolk Posts: 29,087 Thanks: 7,097 Thanked 11,213 Times in 6,582 Posts	Can’t remember if it’s a m12 or m14 but whichever it is a deep multipoint socket does the job. Sent from my iPhone using Tapatalk __________________ Lest we forget..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode