|
||
|
3rd October 2012, 18:00 | #1 |
Avid contributor
Rover 75 CDT club se estate Join Date: Aug 2012
Location: swindon
Posts: 124
Thanks: 61
Thanked 3 Times in 3 Posts
|
Maf sensor and other bits
I bit the bullet and bought a Maf sensor from `Worldcarparts` arrived today says its a genuine part on the website. Got it today and I m not sure.Its got bosch on the side but it came in a box labeled MEAT&DORIA
have I been sold a copy. This leads me onto my next issue. If Im doing the Maf I might aswell do the air filter ,oil filter etc.BUT what are the best to fit can I get them from Euro car parts or do I need genuine parts.What are the best to fit .I m going to clean the EGR too and would just like to add my thanks to ARCTIC for all his advise. Last edited by mert; 5th October 2012 at 10:23.. |
3rd October 2012, 18:12 | #2 |
Regular poster
2002 Rover 75 CDT Club & 1999 Rover 75 CDT Connoisseur SE Join Date: Jul 2012
Location: Aix en Provence (France)
Posts: 64
Thanks: 0
Thanked 0 Times in 0 Posts
|
Hi.
I bought the same last year. No problem, it's an original Bosch one, Meat&Doria are subcontractors of Bosch. I fitted it and it worked fine until I replaced it by a pierburg one (fitted with a Synergy 2) |
3rd October 2012, 18:36 | #3 |
Avid contributor
Rover 75 CDT club se estate Join Date: Aug 2012
Location: swindon
Posts: 124
Thanks: 61
Thanked 3 Times in 3 Posts
|
Thanx for that wanted to go down the synergy route but want to make sure all else is ok first plus xtra £140 not avaliable at present.
|
3rd October 2012, 19:25 | #4 |
Ex 75 Owner
75 Tourerless Join Date: Jul 2010
Location: Manchester
Posts: 2,147
Thanks: 60
Thanked 156 Times in 93 Posts
|
Probably A VW Spec MAF
[QUOTE=mert;1108202]I bit the bullet and bought a Maf sensor from `Worldcarparts` arrived today says its a genuine part on the website. Got it today and I m not sure.Its got bosch on the side but it came in a box labeled MEAT&DORIA
[QUOTE] Hi. I bought one from them a couple of years ago. Rover / MG spec MAFs come with the plastic housing and cost a couple of hundred pounds. The VW spec one is sold as compatible with the Rover / MG because in theory it overfuels by 4% above the manufacturer's specifications, but the sensor is made with a manufacturing tolerance of 4% anyway so it might make no difference to the fuelling. I didn't notice any difference in mpg between the VW spec MAF and the Rover / MG spec one. My VW spec MAF lasted 18 months / 15,000 miles. I haven't read anyone's experience of how long the "proper" one lasts.
__________________
Beyoncé's Green Light Used More Rubber 355188 of 355194 |
4th October 2012, 11:36 | #6 |
Avid contributor
Rover 75 CDT club se estate Join Date: Aug 2012
Location: swindon
Posts: 124
Thanks: 61
Thanked 3 Times in 3 Posts
|
think so its on the worldcarparts website said genuine Bosch and has Bosch on it not so worried now just didn t know if it was a dud copy.
|
5th October 2012, 07:32 | #7 | |
Ex 75 Owner
75 Tourerless Join Date: Jul 2010
Location: Manchester
Posts: 2,147
Thanks: 60
Thanked 156 Times in 93 Posts
|
Hmmm?
Quote:
Link to Land Rover forum post concerning the VW part http://www.lrrforums.com/showthread.php?t=15461&page=2s
__________________
Beyoncé's Green Light Used More Rubber 355188 of 355194 |
|
5th October 2012, 10:03 | #8 |
Regular poster
2002 Rover 75 CDT Club & 1999 Rover 75 CDT Connoisseur SE Join Date: Jul 2012
Location: Aix en Provence (France)
Posts: 64
Thanks: 0
Thanked 0 Times in 0 Posts
|
Hi all.
Here's the link to the AFM I bought from them : AFM alone, without casing, cheaper!!! http://www.worldcarparts.co.uk/CarPa...S/Default.aspx |
5th October 2012, 10:12 | #9 | |
Avid contributor
Rover 75 CDT club se estate Join Date: Aug 2012
Location: swindon
Posts: 124
Thanks: 61
Thanked 3 Times in 3 Posts
|
Quote:
|
|
5th October 2012, 10:15 | #10 |
Avid contributor
Rover 75 CDT club se estate Join Date: Aug 2012
Location: swindon
Posts: 124
Thanks: 61
Thanked 3 Times in 3 Posts
|
yep has Bosch and f 00c 262 092 underneath. So is it any good? I ve just read the bumph from the Landy thread and the only issue I ve got is undoing the two bolts which it says needs to be done with pliers.
Last edited by mert; 5th October 2012 at 10:22.. |
|
|