|
||
|
23rd May 2011, 06:45 | #1 |
Regular poster
MG ZT+ 1.8T 160 Join Date: May 2011
Location: Belfast
Posts: 37
Thanks: 0
Thanked 0 Times in 0 Posts
|
ZT Wheels
Currently have 11 spoke alloys on the 160 but as seems to be quite common, they have blistered and are looking a bit shabby. So I'm going to treat myself to a new set once I get home in a few weeks. Was looking online at a few NI sellers, and been trying to keep my budget in or around £400 ish. Any reccommendations of suitable vendors to have a wee duke at? Also happened to have a look in Rimmers and I see they have replacement 11 spokers for an easy on the wallet £264, which if I'm honest, might do the trick plus it means I'll have my originals as spares/ditch the space saver! They are also a good looking wheel in my view. What are Rimmers like for 1. delivery to NI and 2. quality. Or is there somewhere local that will do them? Any feedback greatly appreciated.
Cheers John Last edited by john_k70; 23rd May 2011 at 06:48.. |
23rd May 2011, 07:15 | #2 |
Posted a thing or two
MG6 Magnette 1.8 Tci SE Join Date: Jun 2009
Location: Shrewsbury
Posts: 1,300
Thanks: 19
Thanked 27 Times in 27 Posts
|
That £264 is per wheel I think - I am getting a set from PX Wheels at Blackpool soon. That is £270 for a set of 4 refurbished wheels, exchanging the ones you have already.
|
23rd May 2011, 09:24 | #3 |
This is my second home
MG ZT260 SE, MG ZT190+, MG ZTT 160, R75 Conn SE 2.0, R75 Conn SE 2.5 X 3, R75 Club SE 1.8, P5B Coupe Join Date: Jul 2009
Location: Keynsham, Bristol
Posts: 4,211
Thanks: 65
Thanked 635 Times in 499 Posts
|
Be careful of the colour match from PX Wheels !
I've posted in earlier threads after trying having a set of Hairpins delivered from them. |
23rd May 2011, 11:43 | #4 |
Posted a thing or two
MG6 Magnette 1.8 Tci SE Join Date: Jun 2009
Location: Shrewsbury
Posts: 1,300
Thanks: 19
Thanked 27 Times in 27 Posts
|
What was the concern regarding the colour match ? Did the wheels vary from each other for example, or was the silver differant from the original sparkle silver ? I intend to visit them to have the wheels put on - so I guess can check tem out before parting with any hard earned.
Last edited by Banjo; 23rd May 2011 at 11:44.. Reason: Missed a bit ! |
23rd May 2011, 20:08 | #5 |
This is my second home
MG6 1.8T GT SE Join Date: Mar 2009
Location: Falkirk
Posts: 9,510
Thanks: 106
Thanked 173 Times in 128 Posts
|
Moved to general forum for better coverage
__________________
MG6 1.8 TCi in Artic White 1975 Land Rover Series 3 |
23rd May 2011, 20:15 | #6 |
Gets stuck in
MG ZT Join Date: Dec 2010
Location: South London
Posts: 664
Thanks: 63
Thanked 19 Times in 18 Posts
|
if you like the 11 spoke style you already have, wouldnt it be a better idea to refurb them, it shouldnt cost the that much rather than forking out on a full new set. just an idea mate, then spend the money you save on something else for your motor...
|
23rd May 2011, 20:59 | #7 |
This is my second home
01 75 tourer cdt,1973 Rover 3500S,,1974 Rover 3500 Auto,1998 216 SE Coupe, 1968 Morris Minor 1000 Join Date: Jul 2010
Location: bangor/down
Posts: 4,839
Thanks: 62
Thanked 184 Times in 158 Posts
|
I had my wheels refurbished by nu-luk carrickfergus, cost £340.Dear but the work is second to none far better than orginal and their after service is fantastic.well worth the money.Mine have been done 2years ago and still are as good.When I get the spare cash if ever I will leave my hairpins up to them for a refurb.
__________________
Regards Neale [SIGPIC][/SIGPIC] 121st 75 Tourer to be made 15th 75 Tourer CDT Club SE to be made 36th 75 Tourer in Zircon Silver Metallic to be made Membership No 903 I was one of the 541 Last edited by Brabus; 23rd May 2011 at 21:06.. |
23rd May 2011, 23:20 | #8 |
I really should get out more.......
ZT-T 160 1.8T Join Date: Jan 2008
Location: West Sussex
Posts: 2,664
Thanks: 46
Thanked 64 Times in 42 Posts
|
Have a hunt around fella for a good set at a scrapper, the ones on mine started to bubble (hairpins) and I managed to get another four for £100. They scrubbed up well and needed a wee bit of touching up.
__________________
[SIGPIC][/SIGPIC] |
25th May 2011, 00:13 | #9 |
Regular poster
MG ZT+ 1.8T 160 Join Date: May 2011
Location: Belfast
Posts: 37
Thanks: 0
Thanked 0 Times in 0 Posts
|
Checked out a refurb at a place over by Dundonald (www.reinventingthewheel.co.uk) they done a curbed wheel on the missus fiesta and was a top job. All four wheels though would have to be left in for 5 days and they couldnt gaurantee finish due to the bad pitting on some of the wheels.Likely round £100 a corner as they are quite bad. Powder coating was reccommended as it would help fill the worst parts, offered at £260. Misread Rimmers! would cost me over a grand.....not gonna happen lol! Longest turnaround I'd be willing to do is two days as 5 days is almost half my vacation at home this time round and cant really do without my wheels.(literally) Think I'll probably go with caraaudioni as they seem reasonable and have a good selection. most likely I'll leave one wheel in at a time at Dundonald (only up the road from me) to get powdercoated then just pick up next time I'm home. (£65 a corner wouldnt drain the funds too much either). To be honest, don't think I could be bothered if I got a set from a scrappies and have to touch them up etc. regardless how little. Nothing like getting new wheels. Cheers for all response. Good to read views.
thx Last edited by john_k70; 25th May 2011 at 00:17.. |
3rd June 2011, 17:31 | #10 |
Posted a thing or two
MG6 Magnette 1.8 Tci SE Join Date: Jun 2009
Location: Shrewsbury
Posts: 1,300
Thanks: 19
Thanked 27 Times in 27 Posts
|
Well I popped up to Blackpool yesterday and had my new refurbished wheels fitted. I rang them on Tuesday to ask if they had 18'' straights in stock. They didn't, but said they could provide some in a week or so. I asked on the off chance if they would do a differant design at the same price - Hairpins perhaps ? They agreed that they would.
On arrival I was met in a friendly manner, and they had the wheels ready for me to inspect. I was impressed with the quality of the finish, with a deep lustrous laqueur. I wandered off to get some lunch, returning an hour later to find them fitted. They looked really good - I had always liked the Hairpin design anyway. Total cost for 5 wheels was £337.50 fitted and balanced. I have to say that I am impressed with the service and quality of the wheels. Needless to say I have no connection with PX Wheels. |
|
|