Wiring Diagrams

CDTi Auto · 11th December 2007, 08:26

Hi

Does anyone know where I can get access to R75/ZT wiring diagrams as I would like to find where I can tap into a switched +12v feed to power an aftermarket reverse park sensor LED display. Not sure where to site it yet, either around the dash, but more likely on top of the rear view mirror (as it's only a small display)

Thanks

Matt

Greeners · 11th December 2007, 08:38

If you take the drivers 'A' pillar trim off, you'll find the connector used by the interior lights and high level brake light. One of the spare cavities in that connector is spare and should be a switched +ve feed used by the auto dimming rear view mirror.

Greeners · 11th December 2007, 09:01

There should be a white/yellow wire that is for the mirror, fused at 10A off fuse number 12. Just check it with a meter to confirm though.

HTH

CDTi Auto · 11th December 2007, 09:13

Quote:

Originally Posted by Greeners

There should be a white/yellow wire that is for the mirror, fused at 10A off fuse number 12. Just check it with a meter to confirm though.

HTH

Top man - thankyou very much!

11th December 2007, 08:26	#1
CDTi Auto Regular poster MG ZT V8 260 SE Join Date: Jun 2007 Location: Chelsea, London Posts: 55 Thanks: 0 Thanked 0 Times in 0 Posts	Wiring Diagrams Hi Does anyone know where I can get access to R75/ZT wiring diagrams as I would like to find where I can tap into a switched +12v feed to power an aftermarket reverse park sensor LED display. Not sure where to site it yet, either around the dash, but more likely on top of the rear view mirror (as it's only a small display) Thanks Matt

11th December 2007, 08:38	#2
Greeners Moderator MG-ZTT Join Date: Mar 2007 Location: Ware, Herts Posts: 19,798 Thanks: 161 Thanked 1,249 Times in 1,036 Posts	If you take the drivers 'A' pillar trim off, you'll find the connector used by the interior lights and high level brake light. One of the spare cavities in that connector is spare and should be a switched +ve feed used by the auto dimming rear view mirror. __________________ *David* Impecunity is the mother of ingenuity Useful how to's for common problems Car Of The Month Jan 2014 [SatNav Power Down] [Coolant Level] [SatNav Repair] [Diesel Non Starting] [Paint Codes] [Rear Light Seals] [Reversing Light Switch] [Bleeding Brakes][Sunroof Drain] [Early ZT's][Instrument Pack Diagnostics][ATC Diagnostics]

11th December 2007, 09:01	#3
Greeners Moderator MG-ZTT Join Date: Mar 2007 Location: Ware, Herts Posts: 19,798 Thanks: 161 Thanked 1,249 Times in 1,036 Posts	There should be a white/yellow wire that is for the mirror, fused at 10A off fuse number 12. Just check it with a meter to confirm though. HTH __________________ *David* Impecunity is the mother of ingenuity Useful how to's for common problems Car Of The Month Jan 2014 [SatNav Power Down] [Coolant Level] [SatNav Repair] [Diesel Non Starting] [Paint Codes] [Rear Light Seals] [Reversing Light Switch] [Bleeding Brakes][Sunroof Drain] [Early ZT's][Instrument Pack Diagnostics][ATC Diagnostics]