|
||
|
5th June 2014, 13:33 | #1 |
Loves to post
MG ZT Join Date: Nov 2011
Location: Doncaster
Posts: 440
Thanks: 3
Thanked 6 Times in 6 Posts
|
New seats wiring issue.
Bought some new alcantara seats to replace my tatty old ones. However upon checking them I find the plugs/wiring is different.
On the old seats already fitted, they both have a big blue and a big yellow plug. The big blue one has a lilac/white and black/white wire on both seats, i'm guessing this plug is pretensioner. Whereas the yellow (more central than blue plug) both have blue wires (x2). However the new ones both have a thin yellow plug towards the pre tensioner with a lilac/white wire and black/white wire. While in the centre on the passenger side is a large yellow plug with blue wiring, on the drivers side it has no plug in the centre, just two blue wires. Is it just a case of chopping off the old seats plugs and marrying the wiring up so that they plug and play, or is there more to it? I don't want to c*ck it up and have an airbag or pretensioner go off! Thanks, Jack.
__________________
[SIGPIC][/SIGPIC] My lovely ZT, CDTI. |
5th June 2014, 18:51 | #2 | |
This is my second home
Previously owned- MG ZT V6 160 Y plate Lpg, MG ZT 190 2003 In Rare Celestial Factory Ordered Lpg MG Join Date: Mar 2010
Location: Calne
Posts: 4,531
Thanks: 8
Thanked 116 Times in 108 Posts
|
Quote:
That's what I have just done with my new seats.
__________________
Previously owned- MG ZT V6 160 Y plate Lpg, MG ZT 190 2003 In Rare Celestial Factory Ordered Lpg MG ZT 190 2004 lpg |
|
5th June 2014, 18:58 | #3 |
MG ZT Join Date: Jan 2011
Location: Newcastle Upon Tyne
Posts: 20,151
Thanks: 3,565
Thanked 10,837 Times in 5,718 Posts
|
|
|
|