ck7w - Page 2

MN190 · 17th May 2009, 16:07

The control button isn't used for initial connection. You just ask your phone to search for Bluetooth devices and then connect to the unit. You will then be asked for passcode which is 0000 if I remember correctly.
When somebody phones you press the button to answer or hang up so I would follow Greeners and my set up and run the cables to front of car for the power to connect to the Nokia box.
The unit you have bought is the 17 pin connector which plugs into the radio in the boot.
Mine would have been set up the same way but was initially installed when I had the lo line nav which has now been changed to the highline set up after kit was fitted and already had an older telemute relay box fitted into the wiring

Greeners · 17th May 2009, 16:10

Make sure your Autolads has the correct plug.....there are two

One for the older 91 car kit which I think was black, and the ck7w should be white.....

MN190 · 17th May 2009, 16:19

And if it has the wrong connector you can either splice and connect into the one that came with the Nokia kit or buy the convertor

solo.cab · 17th May 2009, 17:45

Thanks lads I have the adapter lead from black to white to the power connection ,no problem as long as the autolead is the correct one I think we have cracked it,regarding the button I think you will find once set with the passcode as long as its connected it does not matter where it is if you use autoconnect, which is the way I have it connected on my 75 Saloon,yes you cannot use it to answer if its in the boot or to turn the volume up or down but these car a so sweet you do not need to much volume, which if left on full can be controlled by your phones volume.
Let you know if I need another session if I have ordered wrong cable.
Mal
by the way what a great bunch of blokes use this site well worth £3.00 and worthy of more.

Starman · 17th May 2009, 23:38

Hi Mal, sorry if I confused you a tad back there...

The sot 060 will work if you have ISO connectors already on the CK7W as the kit is very similer to Les' kit some of us have just installed...

But certainly go with those that have been sugested by members that use the CK7W kit...

But I agree with Greeners... Don't mount it in the boot...

Regards....

solo.cab · 20th May 2009, 18:18

hi
fitted cable,does not mute radio,everything seems to work except mute,connects to phone no problem.
you mentioned the yellow mute lead and i thiink you said it has to connect to number 4 lead on the plug into the radio,does this mean you cut the yellow lead that comes from little plug that goes into plug extend it and connect it into number 4 on the radio plug,and just tape up the yellow lead at the little plug end that has been cut.
Mal

MN190 · 20th May 2009, 19:03

You want pin 17 which may not have anything in it currently.

17th May 2009, 16:10	#12
Greeners Moderator MG-ZTT Join Date: Mar 2007 Location: Ware, Herts Posts: 19,798 Thanks: 161 Thanked 1,249 Times in 1,036 Posts	Make sure your Autolads has the correct plug.....there are two One for the older 91 car kit which I think was black, and the ck7w should be white..... __________________ *David* Impecunity is the mother of ingenuity Useful how to's for common problems Car Of The Month Jan 2014 [SatNav Power Down] [Coolant Level] [SatNav Repair] [Diesel Non Starting] [Paint Codes] [Rear Light Seals] [Reversing Light Switch] [Bleeding Brakes][Sunroof Drain] [Early ZT's][Instrument Pack Diagnostics][ATC Diagnostics]

17th May 2009, 17:45	#14
solo.cab Avid contributor ROVER 75 Tourer se 2.5 2001/75 Con Tourer 2.5 2001 Join Date: Aug 2008 Location: Telford (Shropshire) Posts: 205 Thanks: 0 Thanked 0 Times in 0 Posts	ck7w Thanks lads I have the adapter lead from black to white to the power connection ,no problem as long as the autolead is the correct one I think we have cracked it,regarding the button I think you will find once set with the passcode as long as its connected it does not matter where it is if you use autoconnect, which is the way I have it connected on my 75 Saloon,yes you cannot use it to answer if its in the boot or to turn the volume up or down but these car a so sweet you do not need to much volume, which if left on full can be controlled by your phones volume. Let you know if I need another session if I have ordered wrong cable. Mal by the way what a great bunch of blokes use this site well worth £3.00 and worthy of more.

17th May 2009, 23:38	#15
Starman Posted a thing or two 03 CDTi Tourer Conn SE auto Join Date: Jul 2007 Location: Shrewsbury Posts: 1,405 Thanks: 0 Thanked 15 Times in 4 Posts	Hi Mal, sorry if I confused you a tad back there... The sot 060 will work if you have ISO connectors already on the CK7W as the kit is very similer to Les' kit some of us have just installed... But certainly go with those that have been sugested by members that use the CK7W kit... But I agree with Greeners... Don't mount it in the boot... Regards.... __________________ [SIGPIC][/SIGPIC]

20th May 2009, 18:18	#16
solo.cab Avid contributor ROVER 75 Tourer se 2.5 2001/75 Con Tourer 2.5 2001 Join Date: Aug 2008 Location: Telford (Shropshire) Posts: 205 Thanks: 0 Thanked 0 Times in 0 Posts	ck7w hi fitted cable,does not mute radio,everything seems to work except mute,connects to phone no problem. you mentioned the yellow mute lead and i thiink you said it has to connect to number 4 lead on the plug into the radio,does this mean you cut the yellow lead that comes from little plug that goes into plug extend it and connect it into number 4 on the radio plug,and just tape up the yellow lead at the little plug end that has been cut. Mal

17th May 2009, 16:07	#11
MN190 Posted a thing or two MG ZT 190+ Join Date: Nov 2006 Location: North Norfolk Posts: 1,423 Thanks: 2 Thanked 11 Times in 11 Posts	The control button isn't used for initial connection. You just ask your phone to search for Bluetooth devices and then connect to the unit. You will then be asked for passcode which is 0000 if I remember correctly. When somebody phones you press the button to answer or hang up so I would follow Greeners and my set up and run the cables to front of car for the power to connect to the Nokia box. The unit you have bought is the 17 pin connector which plugs into the radio in the boot. Mine would have been set up the same way but was initially installed when I had the lo line nav which has now been changed to the highline set up after kit was fitted and already had an older telemute relay box fitted into the wiring

17th May 2009, 16:19	#13
MN190 Posted a thing or two MG ZT 190+ Join Date: Nov 2006 Location: North Norfolk Posts: 1,423 Thanks: 2 Thanked 11 Times in 11 Posts	And if it has the wrong connector you can either splice and connect into the one that came with the Nokia kit or buy the convertor

20th May 2009, 19:03	#17
MN190 Posted a thing or two MG ZT 190+ Join Date: Nov 2006 Location: North Norfolk Posts: 1,423 Thanks: 2 Thanked 11 Times in 11 Posts	You want pin 17 which may not have anything in it currently.