Front damper assembly version question

joel antonio · 28th January 2020, 06:40

Hi:

I would like to know the opinion if it is possible to mount the indicated front shock absorbers for a 1.8 to my Rover 2.5 V6. I have seen that the difference in weight between the two is about 30 kg per front axle.

The reference I am seeing in Rimmers bros is as follows:

It can be fitted to 1.8 Litre Rover 75 as a standard replacement or to 1.8 MG ZT as a soft ride option.

RND105321ASSY
RND105331ASSY

I appreciate any comments on that.

Kind regards
Joel Antonio

DMGRS · 28th January 2020, 15:25

Unfortunately RND105321ASSY and RND105331ASSY will sit quite high, as per the Rover 75.
RND001000ASSY and RND001010ASSY are the MG ZT versions for the 1.8.

Personally I would say they'll sit too high for a ZT.

Sheraton · 28th January 2020, 15:57

Quote:

Originally Posted by joel antonio

Hi:

I would like to know the opinion if it is possible to mount the indicated front shock absorbers for a 1.8 to my Rover 2.5 V6. I have seen that the difference in weight between the two is about 30 kg per front axle.

The reference I am seeing in Rimmers bros is as follows:

It can be fitted to 1.8 Litre Rover 75 as a standard replacement or to 1.8 MG ZT as a soft ride option.

RND105321ASSY
RND105331ASSY

I appreciate any comments on that.

Kind regards
Joel Antonio

How'do Joel

when you say 30kg per front axle - do you mean 30kg per side ? - i.e a 60kg difference between 1.8 and 2.5 Engines.

i'd think this is quite a substantial difference and fitting assemblies for a 1.8 to a 2.5 would have a noticeable affect on the handling/balance of the Car - it's going to sit a fair bit lower at the front.

it could end up a bit bouncy due to the extra weight vs Spring Rate and insufficient Rebound Damping

I'd be happier with decent "Suitable" aftermarket parts - if possible

Paul.

28th January 2020, 06:40	#1
joel antonio Avid contributor 2003 Rover 75 Tourer Club 2.5 auto, 2000 Rover 75 Club 2.5 manual, 2002 Connoisseur SE 2.5 Auto Join Date: Feb 2011 Location: Segovia, Spain Posts: 170 Thanks: 127 Thanked 28 Times in 21 Posts	Front damper assembly version question Hi: I would like to know the opinion if it is possible to mount the indicated front shock absorbers for a 1.8 to my Rover 2.5 V6. I have seen that the difference in weight between the two is about 30 kg per front axle. The reference I am seeing in Rimmers bros is as follows: It can be fitted to 1.8 Litre Rover 75 as a standard replacement or to 1.8 MG ZT as a soft ride option. RND105321ASSY RND105331ASSY I appreciate any comments on that. Kind regards Joel Antonio __________________ My three amigos...!!!

28th January 2020, 15:25	#2
DMGRS Discount MG Rover Spares Rover 75 CDTi, 2x MG ZS180 Join Date: Jun 2011 Location: Hythe, Southampton Posts: 11,320 Thanks: 456 Thanked 3,377 Times in 2,027 Posts	Unfortunately RND105321ASSY and RND105331ASSY will sit quite high, as per the Rover 75. RND001000ASSY and RND001010ASSY are the MG ZT versions for the 1.8. Personally I would say they'll sit too high for a ZT. __________________ Your trusted MG Rover specialist! Tel: 02380 001133 / Email: [email protected] We now have a 'chat' function on our site for even quicker replies. Give it a try! Remember - discount code FORUM5 for 5% off