|
|
|
|
|
|
||
|
|
||
15th April 2019, 19:02
|
#1 |
|
same car since 2005
2001 Rover 75 2.0 v6 Connoisseur Saloon Join Date: Nov 2006
Location: Ellesmere Port , Cheshire
Posts: 3,811
Thanks: 379
Thanked 549 Times in 466 Posts
|
Any ideas :oil on an injector ?
I'm stripping down the kv6 engine at the moment to replace valve stem oil seals , and have come across something perhaps odd
 After removing the injectors I noticed that the bottom of the injector on cylinder no 5 ( rear end of LH bank ) is wet with oil , as is its seating in the manifold . Photo shows it as best as I can. The other injectors are quite dry . . Could this be related to my blue smoke on startup problem ? I would add that the exterior of the injector is quite clean and the oil is only down by the bottom O-ring . I may see more when I get the manifold off . I have new O-rings ready to go back on . Any ideas please ……….. 
__________________
 Who said it was simples ?
Last edited by chris75; 15th April 2019 at 19:54.. |
|
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode