fog light

actros · 4th December 2019, 10:00

Hi can some one tell what size bulb they are for the front fog lights,

T-Cut · 4th December 2019, 10:18

The handbook specifies H1 55watt

TC

JerseySteve · 4th December 2019, 10:22

H1 55W

Instructions are:
Pull the inboard side of the fog light surround away from the
front of the car - see illustration (gentle leverage using a
flat-bladed screwdriver behind the surround may be
necessary).
Remove the three retaining screws and pull the light unit
forward away from the bumper. Twist the bulb holder an
eighth of a turn anti-clockwise to release it from the rear of
the light unit. Holding only the metal part of the bulb, pull to
remove it from the bulb holder.
When replacing the bulb, note that the circular flange has a
flat on one side. The flat must align with the lug on the
matching face of the bulb holder. Similarly, note the three
tabs on the perimeter of the bulb holder (one small and two
large); correct alignment of the tabs will ensure the holder is
replaced the right way round.

trikey · 4th December 2019, 12:09

I thought you would need C2H2 at your age Bri 🤣🤣

suzublu · 4th December 2019, 13:30

MK1 is H11

KLM · 4th December 2019, 14:20

One of these.

Kev.

4th December 2019, 10:00	#1
actros Subscribed Member 20lt 75conny se Damson red Join Date: Nov 2006 Location: BRIGG Nth Lincs Posts: 4,055 Thanks: 1,267 Thanked 942 Times in 318 Posts	fog light Hi can some one tell what size bulb they are for the front fog lights, __________________ membership number 11

4th December 2019, 12:09	#4
trikey Premium Trader Rover 75 Join Date: Nov 2010 Location: Devon Posts: 33,754 Thanks: 8,837 Thanked 14,831 Times in 8,030 Posts	I thought you would need C2H2 at your age Bri 🤣🤣 __________________ Lest we forget..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

4th December 2019, 10:18	#2
T-Cut This is my second home Rover75 and Mreg Corsa. Join Date: Nov 2006 Location: Sumweer onat mote o'dust (Sagin) Posts: 21,751 Thanks: 341 Thanked 3,660 Times in 2,924 Posts	The handbook specifies H1 55watt TC

4th December 2019, 10:22	#3
JerseySteve Avid contributor Rover 75 Tourer Join Date: Jan 2014 Location: St Helier Posts: 111 Thanks: 144 Thanked 34 Times in 24 Posts	H1 55W Instructions are: Pull the inboard side of the fog light surround away from the front of the car - see illustration (gentle leverage using a flat-bladed screwdriver behind the surround may be necessary). Remove the three retaining screws and pull the light unit forward away from the bumper. Twist the bulb holder an eighth of a turn anti-clockwise to release it from the rear of the light unit. Holding only the metal part of the bulb, pull to remove it from the bulb holder. When replacing the bulb, note that the circular flange has a flat on one side. The flat must align with the lug on the matching face of the bulb holder. Similarly, note the three tabs on the perimeter of the bulb holder (one small and two large); correct alignment of the tabs will ensure the holder is replaced the right way round.

4th December 2019, 13:30	#5
suzublu This is my second home rover 75 1.8 vvc club se wedgwood blue Join Date: Aug 2009 Location: Seaton Carew Posts: 26,905 Thanks: 65 Thanked 7,142 Times in 4,642 Posts	MK1 is H11

4th December 2019, 14:20	#6
KLM Posted a thing or two Rover 75 Club CDT Join Date: Oct 2008 Location: North West Posts: 1,289 Thanks: 691 Thanked 394 Times in 240 Posts	One of these. Kev.