|
||
|
|
27th September 2021, 08:59 | #1 |
This is my second home
All Trophy Blue ,ZT260#50 , ZT CDTI Auto, ZR105+ and 1.8T Firefrost spoiling the Set . Join Date: Nov 2006
Location: Nr Sherborne But in Somerset..
Posts: 6,077
Thanks: 916
Thanked 1,214 Times in 768 Posts
|
OBD2 scanners
Anyone found a scanner that can look at ABS sensors ? , hoping for something more portable than Toaf and a laptop .
just wondering ? C
__________________
The Three Bloo's Wifey's Zr105, MY CDTI & 260 #50 and Number One sons 1.8T in Firefrost When I were a lad Zero to 142 in 10.25 secs at the Pod on my Blown Norton. 210 Kart Champ in 70's |
27th September 2021, 20:05 | #2 |
Posted a thing or two
rover 75 club se Join Date: Apr 2011
Location: Leicester
Posts: 1,666
Thanks: 358
Thanked 419 Times in 310 Posts
|
been looking myself recently. seems its either toaf, or pscan for anything that works. so that means laptop. i hope someones got other options handheld but the rovers a difficult one. i think our hands may have to go deep into the pocket.
|
27th September 2021, 20:11 | #3 |
Posted a thing or two
rover 75 club se Join Date: Apr 2011
Location: Leicester
Posts: 1,666
Thanks: 358
Thanked 419 Times in 310 Posts
|
at least with pscan you cannot do damage. toaf can if you dont know what your doing. or so im told.
|
27th September 2021, 20:28 | #4 |
Gets stuck in
MG ZT 2.5 V6 Auto Tourer (Elizabeth) / MG ZT CDTI (Farage) Join Date: Jan 2017
Location: St Helens
Posts: 688
Thanks: 339
Thanked 109 Times in 89 Posts
|
I thought toaf had an android app??
|
27th September 2021, 21:34 | #5 |
Posted a thing or two
rover 75 club se Join Date: Apr 2011
Location: Leicester
Posts: 1,666
Thanks: 358
Thanked 419 Times in 310 Posts
|
so i have read but im not brave enough to use toaf as i dont really know what im doing, plus if there happens to be a glitch come up with either phone or app .... well i would rather stick with read only and trust the traders who do. the good thing about pscan is it can bleed abs. which is now an added feature, but hopefully i wont need that very often. ..
|
27th September 2021, 22:03 | #6 |
Posted a thing or two
rover 75 club se Join Date: Apr 2011
Location: Leicester
Posts: 1,666
Thanks: 358
Thanked 419 Times in 310 Posts
|
does anyone know on nearside front wheel sensor kv6 r75 what voltage should a multimeter read ? im looking at a sensor problem abs light for an old boy near me who has had both blue underbonnet abs plugs removed and hard wired. ( i think they were brittle and snapped by a butcher at some point). it fails the dynamic on the open road and light comes on. the car does not have cruise but according to the A.A front sensor nearside open circuit code showing on their scan. the car passes the static test with ignition on and then the abs light extinguishes as it should. i have measured red/black power on 12.1 v so that appears ok. red return from sensor i have yet to check. am i looking for 0.6 / 0.7 volts with the wheel at rest with ignition on and abs light out ? i want to establish this first for continuity through the blue plugs hard wires first, before looking for switched voltage approx 1 volt increase. (up to 1.7 v etc.) secondly as these aftermarket ebay sensors have different colour wires , would the hall switch sensor work with any polarity power reversed. ? anyone .. thanks.
|
|
|