|
||
|
12th September 2020, 17:20 | #1 |
Loves to post
Rover 75 Conny Tourer Auto Join Date: Mar 2016
Location: Essex
Posts: 347
Thanks: 75
Thanked 94 Times in 71 Posts
|
Front lower wishbones issue - poor fitting/parts?
Hi all.
Would appreciate some opinions here. Had a pair of lower wishbones bushes fitted quite recently, at the beginning of August, as they were mot advisories. We now seem to have a little bit of a knock from driver's side - not sure if immediately after the above work, we're not driving much at the moment. It happens at slow speeds, sometimes turning and sometimes on rough ground (not speed bumps). It isn't that much of a knock. First suspect for me was the drop link, but I can't detect any movement. So I raised that side onto stands and tried levering the wheel about a bit..... Couldn't find the knock, but noticed the wishbone bush on that side looks odd..... Picture attached. Poor quality part separating and working rearwards? Is that a plastic inner? Or just poorly fitted? It's clear where the bush was (or the original one was). I'll upload pictures of the other side on the first reply, that looks ok to me and the inner appears metallic .... So 2 different parts it would appear. (As a footnote I had asked them to fit the dgmrs ones, but they won't do customer supplied parts. ) Interested in your thoughts/comments. Sent from my Redmi Note 7 Pro using Tapatalk
__________________
2003 Tourer, Connoisseur Auto |
12th September 2020, 17:21 | #2 |
Loves to post
Rover 75 Conny Tourer Auto Join Date: Mar 2016
Location: Essex
Posts: 347
Thanks: 75
Thanked 94 Times in 71 Posts
|
Pictures of other side, which looks ok to me
Sent from my Redmi Note 7 Pro using Tapatalk
__________________
2003 Tourer, Connoisseur Auto |
12th September 2020, 17:48 | #3 |
I really should get out more.......
MG ZT-T, Rover 75 Tourer Join Date: Mar 2011
Location: Olney
Posts: 2,969
Thanks: 245
Thanked 1,088 Times in 657 Posts
|
Both are wrong, the OS one has separated and needs replacing, the NS one has not been fitted correctly.
|
12th September 2020, 17:55 | #4 | |
Loves to post
Rover 75 Conny Tourer Auto Join Date: Mar 2016
Location: Essex
Posts: 347
Thanks: 75
Thanked 94 Times in 71 Posts
|
Quote:
Sent from my Redmi Note 7 Pro using Tapatalk
__________________
2003 Tourer, Connoisseur Auto |
|
12th September 2020, 18:01 | #5 |
I really should get out more.......
MG ZT-T, Rover 75 Tourer Join Date: Mar 2011
Location: Olney
Posts: 2,969
Thanks: 245
Thanked 1,088 Times in 657 Posts
|
The only thing you should be seeing at the rear of the bush is approx 1/4 inch of the arm poking out, not the bush material!
|
12th September 2020, 19:06 | #6 |
Gets stuck in
MG ZT-T Join Date: Feb 2016
Location: Horsham
Posts: 874
Thanks: 197
Thanked 239 Times in 207 Posts
|
Agree with Phil, that's not right, either cheap and nasty parts or fitted by a ham-fisted oaf.............. or both!
__________________
My garage. 03/53 MG ZT-T+ CDTi auto in XPG. 232k and much to do! 21/21 MG ZS ev. Daily. 85/C Capri 2.8i Special. Mine 29+ years. 82/X Talbot Tagora SX V6. Restoration project. 11/11 Hyundai I Load CRDi. Van....... nuff said. |
12th September 2020, 19:12 | #7 |
This is my second home
MG ZT and Rover 75, Join Date: Jul 2013
Location: Wigan
Posts: 3,276
Thanks: 2,556
Thanked 2,685 Times in 1,037 Posts
|
The problem.
It's been fitted correctly, the bolts will put the line up in the perfect position, but the bonding of the bush in the carrier and the tightness of the fit are non existent. The bush centre is slowly working backwards every time it moves, it's not flexing in the carrier, it's just rotating until it falls out. This is a poor item and you need to get your money back.
|
13th September 2020, 09:00 | #8 |
Gets stuck in
MG ZT 2.0 cdti Join Date: Aug 2019
Location: Derby
Posts: 909
Thanks: 298
Thanked 191 Times in 149 Posts
|
What make are the arms please?
__________________
….And the latest thing to break is..... ### MG STANDS FOR "MY GREMLIN" !!! |
13th September 2020, 09:17 | #9 |
This is my second home
Rover 75 CDT Manual Connoisseur SE, Rover 75 CDT Automatic Connoisseur SE & a Freelander Td4. Join Date: Jul 2009
Location: Hampshire
Posts: 11,549
Thanks: 3,470
Thanked 3,119 Times in 2,247 Posts
|
To me it looks like either the arms are a bit too big or the bushes a bit too small, so the arms haven't gone as far into the bushes as they should have.
Whoever fitted them should have dressed the hexagonal flats of the arms with a file to ensure a good snug but not too tight a fit - easily and quickly done as they are aluminium. |
13th September 2020, 11:59 | #10 |
Loves to post
Rover 75 Conny Tourer Auto Join Date: Mar 2016
Location: Essex
Posts: 347
Thanks: 75
Thanked 94 Times in 71 Posts
|
No idea I'm afraid, never changed in my ownership. Bushes were garage supply and fit, again don't know the brand(s)
Sent from my Redmi Note 7 Pro using Tapatalk
__________________
2003 Tourer, Connoisseur Auto |
|
|