|
||
|
29th April 2019, 18:38 | #1 |
Posted a thing or two
Rover 75 Saloon & Tourer Join Date: Mar 2013
Location: Wilmslow
Posts: 1,513
Thanks: 433
Thanked 301 Times in 212 Posts
|
OEM 2004 spec. Harmon Kardon on my SE Contemporary
I've gone mad and just fitted a BMW Alpine 16:9 bordmonitor (with CD back) and there's a flat pin BM54 Professional tuner/amp winging it's way to me.
I just want plug/play to get started so I require the pin changer adaptor loom. Reading some of the tech stuff on the web it seems there can be issues obtaining the correct one for the job - can anyone point me in the right direction with a (UK) supplier and description/spec. for what I need. At the moment the x6 CD multichanger operates as normal, the CD back in the widescreen doesn't make a sound (so I guess that until I disconnect it, the the changer will always override the CD back). I might want to add a hands-free (bluetooth?) later, is this facility in-built in the BM54 (there's a phone button logo on the boardmonitor) so can it operate through the existing HK speaker system? |
29th April 2019, 21:10 | #2 |
This is my second home
BMW 330d Tourer, MG ZT 180 SE XPG, VW Polo 6R 1.2 TDI Bluemotion Join Date: Jul 2011
Location: York
Posts: 6,022
Thanks: 363
Thanked 574 Times in 319 Posts
|
Only the BM54 can process the digital output of the Bordmonitor. It won’t give audio without it.
You need one of these: https://rover.ebay.com/rover/0/0/0?m...2F222325784304 You will also need to remove and modify the radio tuner bracket as the BM54 is slightly bigger and doesn’t fit the BM24 aperture |
29th April 2019, 22:29 | #3 | |
Posted a thing or two
Rover 75 Saloon & Tourer Join Date: Mar 2013
Location: Wilmslow
Posts: 1,513
Thanks: 433
Thanked 301 Times in 212 Posts
|
Quote:
|
|
30th April 2019, 09:50 | #4 |
Gets stuck in
MG ZT 190 SE Join Date: Oct 2017
Location: Chatham, Kent
Posts: 569
Thanks: 22
Thanked 163 Times in 135 Posts
|
I only upgraded my OEM system to BM24, but I believe that if you have the 16:9 BMW unit then you also need the 16:9 TV tuner module for it as well. I think the standard Rover unit will only give you 4:3 regardless of the 16:9 fitted.
A BM54 Back (with round pins) is a direct swap but don't think this gives full functionality that the flat pin one does for Bluetooth etc, so you need the adapter plugs. The inbuilt CD player may not work as the original system had a tape player and the CD auto-changer. If you haven't already, might as well chuck in the Mk4 DVD drive for Sat Nav - this is much better than the Mk3 CD. |
30th April 2019, 12:34 | #5 | |
Posted a thing or two
Rover 75 Saloon & Tourer Join Date: Mar 2013
Location: Wilmslow
Posts: 1,513
Thanks: 433
Thanked 301 Times in 212 Posts
|
Quote:
What I need to know is where I can obtain the correct tuner/amp. converter lead(s). I have a flat pin BM54 Professional Becker in transit and I'm dumping the standard HiLine Rover tuner (which got a bath in the wheel well and is a bit dodgy anyway). The HiLine loom end is 17 round 'sockets' (14 of which are assigned) in the big black holder with two smaller 10 pin sockets (I think these might be for the speakers) - 6 wires to the grey holder and 5 wires to the black holder) so I require a pin changer (adaptor) lead with (at the BM54 end) a big black holder with flat sockets and two smaller sockets (for the speakers?) and at the loom end a big black (14) round pins holder with two smaller 10 pin plugs (for the speakers?). I've read somewhere that there is also a short aerial lead required, any ideas? |
|
|
|