|
||
|
1st October 2008, 18:02 | #1 |
Newbie
MG ZT 190 2.5 V6 '03 Join Date: Aug 2008
Location: Turku, SW Finland
Posts: 28
Thanks: 0
Thanked 0 Times in 0 Posts
|
Fault codes P1471 & 1472
Good evening,
I had a failure in my annual checking due to poor emissions: CO was 1.34 (should be 0.2 at max) and HC was 135 (should be 100 at maximum). Then I checked the fault codes: P1471 Variable intake manifold actuator 1 - valve always closed Variable intake manifold actuator 1 function - valve always closed Yes P1472 Variable intake manifold actuator 2 - valve always open Variable intake manifold actuator 2 function - valve always opened Yes The smartbox receipt says: p1472 Variable intake Butterfly Valve, always open p1471 Variable intake Balance Valve, always closed I also noticed some misfires from the test screen while checking the emissions. Are all these related? And why there weren't any warnings..? Any suggestions? Thanks! |
1st October 2008, 18:09 | #2 | |
Vis Whiz
Rover 75 2.5 auto Saloon Join Date: Jun 2007
Location: LEEDS
Posts: 20,591
Thanks: 2,057
Thanked 3,056 Times in 1,621 Posts
|
Quote:
VIS motor failure, hot topic on here at the moment do a search for VIS motor testing
__________________
Dave... Lost a few stones and a Gall Bladder and part of a bile duct and all of my dignity in the suppository incident |
|
1st October 2008, 18:27 | #3 |
Newbie
MG ZT 190 2.5 V6 '03 Join Date: Aug 2008
Location: Turku, SW Finland
Posts: 28
Thanks: 0
Thanked 0 Times in 0 Posts
|
Ok, thanks. Then it's the weather maybe..
|
|
|