|
||
|
2nd July 2020, 17:12 | #1 |
This is my second home
Rover 75 Saloon & Tourer Join Date: Sep 2012
Location: Lincoln
Posts: 14,928
Thanks: 1,630
Thanked 3,032 Times in 2,181 Posts
|
builder or tradesmen
when it comes to building and I'm thinking a garage are you cost wise, better to get a builder to do the lot or individual tradesmen
if all do their work to spec? foundations, concrete floor, brick layer, chippy, roofer, sparks? macafee2 |
2nd July 2020, 17:39 | #2 | |
MG ZT Join Date: Jan 2011
Location: Newcastle Upon Tyne
Posts: 20,151
Thanks: 3,565
Thanked 10,837 Times in 5,718 Posts
|
Quote:
I'm going to set out the foundations on my new workshop, then employ a brickie to build the walls, and once they're up I'll order the roof trusses and tiles to finish off the top end. As to your question, get some quotes and see what they say, a lot of builders simply are not interested in small jobs unfortunately, and more importantly get the names of previous customers who have had work done and are happy for you to talk to them. Brian |
|
3rd July 2020, 09:53 | #3 |
This is my second home
R75 Saloon. Join Date: Feb 2009
Location: France/or Devon.
Posts: 14,003
Thanks: 3,851
Thanked 2,167 Times in 1,816 Posts
|
Just curious Brian. You say abortion. Any chance you could be just a bit more specific ??----
|
3rd July 2020, 10:06 | #4 |
This is my second home
R75 Saloon. Join Date: Feb 2009
Location: France/or Devon.
Posts: 14,003
Thanks: 3,851
Thanked 2,167 Times in 1,816 Posts
|
Further to the above post.
I used to run a variety of building sites before retirement. Below is a pic of one of the sites I was in charge of as site manager. An estate of 40 houses. The drawings I was given were for houses on a level field. I personally changed the foundations and added extra features to accommodate those changes. That's what made me curious about your observations on that garage. PS. Plus it's got a ROVER in it. Lol. |
3rd July 2020, 10:33 | #5 | |
Gets stuck in
VW touareg Join Date: Mar 2015
Location: dunsop bridge
Posts: 870
Thanks: 225
Thanked 414 Times in 235 Posts
|
Quote:
The big question is though Brian, have you moved all those bricks yet? Stan
__________________
WE WERE BOTH BORN ON THE 4th of JULY CAR DIED 15/11/2022---I'M STILL GOING (JUST) |
|
3rd July 2020, 12:24 | #6 | |
MG ZT Join Date: Jan 2011
Location: Newcastle Upon Tyne
Posts: 20,151
Thanks: 3,565
Thanked 10,837 Times in 5,718 Posts
|
Quote:
There was a parapet wall between the two garages with capping on, this was removed but the last courses were not, so the roof intersects the remains of the parapet which has some sort of sticky flashing like flashband stuck to the membrane, and a big gap at the end of the tiles. Apart from anything else the bottom tile batten isn't parallel with the eaves so as a result the tiles run off at an angle, which can be seen at the verges where no undercloak was used, dry verge nailed to a wooden lath nailed to the compo at the top of the brickwork. The gutter runs uphill to both sides of the downcomer, which has been run around the corner A quality job, you bet Brian |
|
3rd July 2020, 12:52 | #7 |
This is my second home
R75 Saloon. Join Date: Feb 2009
Location: France/or Devon.
Posts: 14,003
Thanks: 3,851
Thanked 2,167 Times in 1,816 Posts
|
Thanks Brian. Difficult to see all that from the pic.---
To the OP. Most of the work building a garage is fairly easy if you have reasonable building skills. If not then you might be able to tackle the floor slab yourself and even the simple electrics but you'll need the other three trades to complete the job.---- Look at their previous work though and don't take any chances.---Good luck with it. With any job quality control by yourself is ESSENTIAL to nip any errors in the bud. PS. Tiling battens. The membrane has to have the battens on top so that the hooks on the roof tiles can fix on to them. The angle of the roof determines if tilting fillets are required. The wall plate that the gang-nailed roof trusses sits on must also be fixed down to the garage walls by wall straps. As they say in the trade the work needs a good coat of looking at.--Lol. Last edited by COLVERT; 3rd July 2020 at 13:03.. |
3rd July 2020, 16:37 | #8 | |
This is my second home
MG ZT and Rover 75, Join Date: Jul 2013
Location: Wigan
Posts: 3,276
Thanks: 2,556
Thanked 2,685 Times in 1,037 Posts
|
I agree.
Quote:
|
|
3rd July 2020, 17:16 | #9 | |
This is my second home
Rover 75 Saloon & Tourer Join Date: Sep 2012
Location: Lincoln
Posts: 14,928
Thanks: 1,630
Thanked 3,032 Times in 2,181 Posts
|
Quote:
As for electrics, yes I could do them but I'd like them certified. The slab, worried I'd get it wrong and it would bend and crack. I have these ideas going around in my head, I can go 4 meters vertical without planning permission but I think I'd like a lift and so with the depth and width of the garage I may need more the 4 meters in height for the slope of the roof. I'd also like a loft that I can stand up in. This may be my one chance to have a very big garage with a "workshop" attached. Workshop would have my lathe, shot blaster and compressor, work benches benches and I think I'd get some new toys such as a pillar drill. I would be at home every day so can try to keep an eye on things. could all be pie in the sky but I'd like to be prepared macafee2 |
|
3rd July 2020, 17:18 | #10 | |
This is my second home
Rover 75 Saloon & Tourer Join Date: Sep 2012
Location: Lincoln
Posts: 14,928
Thanks: 1,630
Thanked 3,032 Times in 2,181 Posts
|
Quote:
I'm good with nuts and bolts macafee2 |
|
|
|