front hubs, are they all the same

anddyy · 8th January 2016, 23:11

are the front wheel hubs different for each engine or could I get a hub from a 1.8 and fit it to my 2.5.

no 2.5s in the scrappy up here but plenty of 1.8 and cdts

wheel bearing is really noisy and was wanting to get a spare hub to leave with the garage to press a new bearing into, so I can keep the car on the road in the mean time.

andy willi · 9th January 2016, 06:25

yep all the same

andy

minimutly · 9th January 2016, 12:27

Blatant post hijack here, but its not often Andy posts. So here goes, what are the differences in the shafts model to model Andy? Are they just length differences, or strength as well?

anddyy · 9th January 2016, 14:41

Eh post hijack??

klarzy · 9th January 2016, 15:17

Quote:

Originally Posted by anddyy

Eh post hijack??

"asking a different question inside another persons thread which does not support the original posters problem"

anddyy · 9th January 2016, 15:27

Was having a blonde moment then, for some reason I read minimutlys post and thought he said there, when he said here

Anyway i presume by that reply that the driveshafts at the hub end are all the Same with the size and amount of splines.

reclamation ray · 9th January 2016, 15:43

After reading your post, can you please let me know which scrappy it is you use in Blackpool?

DMGRS · 9th January 2016, 15:57

Quote:

Originally Posted by reclamation ray

After reading your post, can you please let me know which scrappy it is you use in Blackpool?

Another off topic post, but Atlas on Jackson Road, St Helens have a few 75s in.
Bit of a drive, but last time I got an amazing haul of parts for my cars.

anddyy · 9th January 2016, 15:58

Quote:

Originally Posted by reclamation ray

After reading your post, can you please let me know which scrappy it is you use in Blackpool?

All car parts blackpool on vicarage lane ( pot luck most of the time as to what they have in stock) and there's another on poulton industrial estate can't remember what it's called think it ratcliffe & son.
Down side to these two places is they won't let you have a walk around and remove stuff yourself and not always the best selection of cars.

I end up going down to Warrington most of the time as there are 2 good old style scrappy there that let you walk around and remove it yourself, cheap as well so worth the trip down

anddyy · 9th January 2016, 15:59

Quote:

Originally Posted by DMGRS

Another off topic post, but Atlas on Jackson Road, St Helens have a few 75s in.
Bit of a drive, but last time I got an amazing haul of parts for my cars.

My favourite yard that, good bunch of lads and a nice concrete floor and cars all single height.

8th January 2016, 23:11	#1
anddyy Avid contributor mg zt 180+ Join Date: May 2015 Location: blackpool Posts: 182 Thanks: 15 Thanked 38 Times in 34 Posts	front hubs, are they all the same are the front wheel hubs different for each engine or could I get a hub from a 1.8 and fit it to my 2.5. no 2.5s in the scrappy up here but plenty of 1.8 and cdts wheel bearing is really noisy and was wanting to get a spare hub to leave with the garage to press a new bearing into, so I can keep the car on the road in the mean time.

9th January 2016, 06:25	#2
andy willi I really should get out more....... PRE LAUNCH 75/ZT 190/XJ 550 Join Date: Jan 2007 Location: carcroft doncaster Posts: 2,866 Thanks: 101 Thanked 680 Times in 342 Posts	yep all the same andy

9th January 2016, 12:27	#3
minimutly Posted a thing or two mg zt Join Date: Mar 2014 Location: cardigan Posts: 1,087 Thanks: 28 Thanked 187 Times in 158 Posts	Blatant post hijack here, but its not often Andy posts. So here goes, what are the differences in the shafts model to model Andy? Are they just length differences, or strength as well?

9th January 2016, 14:41	#4
anddyy Avid contributor mg zt 180+ Join Date: May 2015 Location: blackpool Posts: 182 Thanks: 15 Thanked 38 Times in 34 Posts	Eh post hijack??

9th January 2016, 15:27	#6
anddyy Avid contributor mg zt 180+ Join Date: May 2015 Location: blackpool Posts: 182 Thanks: 15 Thanked 38 Times in 34 Posts	Was having a blonde moment then, for some reason I read minimutlys post and thought he said there, when he said here Anyway i presume by that reply that the driveshafts at the hub end are all the Same with the size and amount of splines.

9th January 2016, 15:43	#7
reclamation ray Avid contributor ROVER 75 SALOON AUTO Join Date: Dec 2015 Location: Preesall Posts: 106 Thanks: 79 Thanked 15 Times in 13 Posts	After reading your post, can you please let me know which scrappy it is you use in Blackpool?