|
||
|
27th February 2012, 16:31 | #1 |
Avid contributor
Rover 75 2.0 V6 Connossieur SE Join Date: Jul 2008
Location: York
Posts: 183
Thanks: 13
Thanked 12 Times in 6 Posts
|
Hatch cover & screw, headlamp cover & clip
Changing the dipped beam headlamp bulb on the driver's side of my Mark I 2.0 Connoisseur recently, I made two discoveries. One was that they were obviously designed so that only a contortionist with very small hands would ever be able to change a bulb; the other was that the following items are all missing:
|
27th February 2012, 17:27 | #2 |
Posted a thing or two
Rover 75 CDTi Conn Tourer & Rover 75 CDT Conn SE Saloon Join Date: May 2010
Location: Queensbury
Posts: 1,368
Thanks: 0
Thanked 1 Time in 1 Post
|
I definitely have a hatch cover and screw and am fairly certain I have a rubber cover for the dipped beam and possibly the spring.
I had headlamps that had been used for some time with no rubber cap and no cover in the wheel arch and were full of crud as a result, which I have replaced. I'll have a gander in the garage and see if I can find them. Chris
__________________
Mods so far X-Power Performance Upgrade LED interior lights and sidelights Genuine Rover Xenons - now removed and sold Kenlowe fan Synergy 2 EGR Bypass |
1st March 2012, 19:51 | #3 |
Avid contributor
Rover 75 2.0 V6 Connossieur SE Join Date: Jul 2008
Location: York
Posts: 183
Thanks: 13
Thanked 12 Times in 6 Posts
|
That sounds hopeful. If you find them, let me know what you want for them.
|
|
|