|
||
|
9th October 2021, 13:44 | #1 |
Newbie
Rover 75 Saloon Join Date: Oct 2020
Location: Stevenage
Posts: 28
Thanks: 12
Thanked 4 Times in 3 Posts
|
Cooling Fan Not Working - P0481 Error
Hi,
My cooling fan doesn't work. It's the type with a silver resistor but doesn't work on either low or high speed, so the car (facelift 2.5 Auto) overheats when stationary (only done to test). TOAF gives me: P0481 - Cooling fan 2 control circuit malfunction - short to ground - no signal detected - sporadic error - fault present Does that mean I need to replace the fan unit, or might there be errors in the wiring before the current gets there? I have a few other "short to ground" errors as well affecting other components (e.g. K bus). Just not sure where to start looking now.
__________________
------------------------------------------- 2005 Connoisseur SE in Platinum Gold |
9th October 2021, 13:57 | #2 |
I really should get out more.......
Rover 75 Saloon Join Date: Jul 2011
Location: Gävle
Posts: 2,534
Thanks: 395
Thanked 823 Times in 652 Posts
|
Toaf checks all three speeds as per original spec, the 2 speed came later. Odd that even your high speed isn't working - have you moved the slider within the Toaf checking process to roughly halfway?
Try the demist check too. Regards |
9th October 2021, 14:36 | #3 |
Newbie
Rover 75 Saloon Join Date: Oct 2020
Location: Stevenage
Posts: 28
Thanks: 12
Thanked 4 Times in 3 Posts
|
Thanks - I hadn't noticed that within TOAF - will give it a go. Is it possible it's reporting an error for the speed I don't have?
I've tried both the demist/ECON method for low speed and the "let the temp get up to 115C" method for high speed - neither gets the fan going.
__________________
------------------------------------------- 2005 Connoisseur SE in Platinum Gold |
9th October 2021, 14:43 | #4 | |
I really should get out more.......
Rover 75 Saloon Join Date: Jul 2011
Location: Gävle
Posts: 2,534
Thanks: 395
Thanked 823 Times in 652 Posts
|
Quote:
Good luck ps Check your VIS motors too, if you don't know how just ask. |
|
9th October 2021, 15:01 | #5 |
Newbie
Rover 75 Saloon Join Date: Oct 2020
Location: Stevenage
Posts: 28
Thanks: 12
Thanked 4 Times in 3 Posts
|
Funnily enough, the next error was
P1472 - Variable intake manifold actuator 2 - valve always open - short to ground - sporadic error Could that be related at all?
__________________
------------------------------------------- 2005 Connoisseur SE in Platinum Gold |
9th October 2021, 15:13 | #6 |
I really should get out more.......
Rover 75 Saloon Join Date: Jul 2011
Location: Gävle
Posts: 2,534
Thanks: 395
Thanked 823 Times in 652 Posts
|
Not generally related - best thing is to open the bonnet, start Toaf, same menu as the fan, select VIS balance / power, press the start button and listen: you should hear four distinct sweeps of each motor in turn. No sweeps or just a click - contact Stocktake on here who renovates these motors to a standard better than new.
Regards |
9th October 2021, 15:26 | #7 |
This is my second home
ZT260 #243 (resting) Join Date: May 2010
Location: Prestonpans
Posts: 22,479
Thanks: 650
Thanked 4,624 Times in 3,358 Posts
|
TOAF is set up for the original three speed fan. The three speed fan is low, medium and high, two speed fan if low and high. Because TOAF can't get a response from the medium speed in a two speed fan it sees it as a fault.
|
9th October 2021, 19:03 | #8 | |
Doesn't do things by halves
Rover 75 2.5 Connoisseur Auto (1999) Dealer launch model. Join Date: Mar 2007
Location: Former Middlesex
Posts: 20,376
Thanks: 1,587
Thanked 3,749 Times in 3,181 Posts
|
Quote:
If you are DIY-minded and are willing to have a go with a multimeter, we can find out what's wrong with your 2 speed fan. What's your car's mileage? Simon
__________________
"Whatever is rightly done, however humble, is noble." Sir Henry Royce. |
|
9th October 2021, 20:24 | #9 | |
Newbie
Rover 75 Saloon Join Date: Oct 2020
Location: Stevenage
Posts: 28
Thanks: 12
Thanked 4 Times in 3 Posts
|
Quote:
Yes, I have a multimeter and will give anything a go - mileage is 116k.
__________________
------------------------------------------- 2005 Connoisseur SE in Platinum Gold |
|
10th October 2021, 07:05 | #10 |
Doesn't do things by halves
Rover 75 2.5 Connoisseur Auto (1999) Dealer launch model. Join Date: Mar 2007
Location: Former Middlesex
Posts: 20,376
Thanks: 1,587
Thanked 3,749 Times in 3,181 Posts
|
That's great Richard.
116k is a high mileage so it may be that brush wear is responsible for your loss of all speeds, particularly if the air conditioning has been run continuously during the car's life. To find out we will need access to the fan control box which means taking off the front bumper assembly. This isn't as daunting as it might seem and Arctic's pictorial guides cannot be bettered! As you'll need lots of room to manoeuvre, the weather forecast is good over the next week for working outside. Let me know when you've done that and you never know, you might discover something simple like a broken wire. But if everything is intact we'll get started on some electrical measurements. Simon
__________________
"Whatever is rightly done, however humble, is noble." Sir Henry Royce. |
|
|