Harmony to multi cd wiring

jaketheted · 31st May 2011, 19:53

Just fitted an XQE105560 multi changer in the glove box and connected the wiring up,with a seperate lead,after connecting pos and neg the cd player magazine is
selecting a cd,the remaining wire (white) I take it to be the bus wire, is connected to the only available space in the connector block.The cd does not play and neither is there a display relating to the cd at all.Anybody any ideas? Cheers

raykay · 31st May 2011, 20:29

The K-Bus is in pin 5 of the connector, on the car loom it is White/Red/Yellow.

31st May 2011, 19:53	#1
jaketheted Newbie rover saloon Join Date: Mar 2011 Location: Preston Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts	Harmony to multi cd wiring Just fitted an XQE105560 multi changer in the glove box and connected the wiring up,with a seperate lead,after connecting pos and neg the cd player magazine is selecting a cd,the remaining wire (white) I take it to be the bus wire, is connected to the only available space in the connector block.The cd does not play and neither is there a display relating to the cd at all.Anybody any ideas? Cheers Last edited by jaketheted; 31st May 2011 at 20:07..

31st May 2011, 20:29	#2
raykay I really should get out more....... Now Other Manufacturer Join Date: Nov 2006 Location: Co. Kerry Posts: 2,786 Thanks: 16 Thanked 310 Times in 283 Posts	The K-Bus is in pin 5 of the connector, on the car loom it is White/Red/Yellow.