Sat Nav gone for a burton

ged116 · 5th July 2021, 18:01

Hello, My SatNav on my head unit has suddenly stopped working, all I get is a white screen with a cross in the middle I wondered if anyone can tell me why it has happened and if I can get I back up and working again? Hoping someone can help, all the best. Gerald

xsport · 6th July 2021, 13:51

you dont say what type of satnav it is. but i can recall that on my double din unit (long gone now) this screen is part of the set up proceedure for your touch screen set up. you need to press the centre cross and then you should see the same cross appear in each of the four corners as you work your way around the screen by touching the corners one after the other.some units go corner /centre /corner centre and others after the centre touch first each corner one after the other but centre cross in between. just allow time after pressing each time for the next cross to appear. its simple once you get the hang of it. its for touch screen recalibration and should be documented in the install booklet if you have one. others on here may be able to assist further. good luck.

5th July 2021, 18:01	#1
ged116 Regular poster 75 saloon Join Date: Sep 2010 Location: Doncaster Posts: 44 Thanks: 4 Thanked 2 Times in 1 Post	Sat Nav gone for a burton Hello, My SatNav on my head unit has suddenly stopped working, all I get is a white screen with a cross in the middle I wondered if anyone can tell me why it has happened and if I can get I back up and working again? Hoping someone can help, all the best. Gerald

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

6th July 2021, 13:51	#2
xsport Posted a thing or two rover 75 club se Join Date: Apr 2011 Location: Leicester Posts: 1,636 Thanks: 358 Thanked 419 Times in 310 Posts	you dont say what type of satnav it is. but i can recall that on my double din unit (long gone now) this screen is part of the set up proceedure for your touch screen set up. you need to press the centre cross and then you should see the same cross appear in each of the four corners as you work your way around the screen by touching the corners one after the other.some units go corner /centre /corner centre and others after the centre touch first each corner one after the other but centre cross in between. just allow time after pressing each time for the next cross to appear. its simple once you get the hang of it. its for touch screen recalibration and should be documented in the install booklet if you have one. others on here may be able to assist further. good luck.