|
||
|
16th November 2019, 12:28 | #1 |
Newbie
mg zt Join Date: Sep 2019
Location: VILLEPREUX
Posts: 25
Thanks: 0
Thanked 0 Times in 0 Posts
|
Rear sunblind
hello, to add a rear sunblind on a rover 75 is it necessary to reprogram the ZCS codes for it to work?
Thank you for your answers and leave for my bad English |
16th November 2019, 12:58 | #2 | |
This is my second home
MG ZT CDTi Join Date: Jan 2014
Location: carrick
Posts: 7,859
Thanks: 3,494
Thanked 2,657 Times in 1,973 Posts
|
Quote:
Mine didnt work all of the time, I replaced the motor, as this can fail (magnet falling off the shroud). My main problem was the shelf was not bolted down from under the parcel shelf (access in the boot). Once tightened up, it worked more often. Then sprayed the mechanism with silicone lubricant and since then it works all the time.
__________________
It is not gloss primer .............. it is duct tape silver! |
|
16th November 2019, 13:51 | #3 |
Newbie
mg zt Join Date: Sep 2019
Location: VILLEPREUX
Posts: 25
Thanks: 0
Thanked 0 Times in 0 Posts
|
ok thank you very much that's nice
|
16th November 2019, 17:52 | #4 |
This is my second home
Rover 75 Saloon & Tourer Join Date: Sep 2012
Location: Lincoln
Posts: 14,912
Thanks: 1,630
Thanked 3,032 Times in 2,181 Posts
|
be careful when removing the parcel shelf not to pull any wires off of the rear screen
macafee2 |
17th November 2019, 16:56 | #5 |
Newbie
mg zt Join Date: Sep 2019
Location: VILLEPREUX
Posts: 25
Thanks: 0
Thanked 0 Times in 0 Posts
|
thanks for the advice
|
Thread Tools | |
Display Modes | |
|
|