Good service today.

trikey · 20th December 2019, 19:21

Called in to have my stainless exhaust adjusted today, I fitted a rear anti roll bar and subsequently moved the exhaust a little too far to the rear of the car this coupled with a failed lower engine mount meant that the exhaust fell off the rear hanger!

Anyway, I just want to praise these guys for great service, it took half an hour to adjust the stainless hangers and get everything straight again.

The charge? Nowt! That’s right, he said it was on the house, I gave him a drink as there are not enough places these days that will do jobs like this.

So, if your looking for a stainless exhaust you could do a lot worse than calling in here

http://1stperformance.co.uk/2016/09/...rflow-norwich/

Rogue · 20th December 2019, 19:58

Did you get the mount bolt off while it was up on the ramps ?

trikey · 20th December 2019, 20:35

Quote:

Originally Posted by Rogue

Did you get the mount bolt off while it was up on the ramps ?

No mate, I Still have that little task to do.

20th December 2019, 19:21	#1
trikey Premium Trader Rover 75 Join Date: Nov 2010 Location: Devon Posts: 33,773 Thanks: 8,837 Thanked 14,831 Times in 8,030 Posts	Good service today. Called in to have my stainless exhaust adjusted today, I fitted a rear anti roll bar and subsequently moved the exhaust a little too far to the rear of the car this coupled with a failed lower engine mount meant that the exhaust fell off the rear hanger! Anyway, I just want to praise these guys for great service, it took half an hour to adjust the stainless hangers and get everything straight again. The charge? Nowt! That’s right, he said it was on the house, I gave him a drink as there are not enough places these days that will do jobs like this. So, if your looking for a stainless exhaust you could do a lot worse than calling in here http://1stperformance.co.uk/2016/09/...rflow-norwich/ __________________ Lest we forget..

20th December 2019, 19:58	#2
Rogue I really should get out more....... 75 CDT SE 160 Saloon Join Date: May 2017 Location: Thorpe St Andrew, Norwich Posts: 2,655 Thanks: 1,386 Thanked 1,096 Times in 774 Posts	Did you get the mount bolt off while it was up on the ramps ? __________________ Glutton for punishment --- Previously ... 2.6 SD1 x 2, 3.5 SD1, 820S, 820Si x2, 216 Gsi, 220T saloon, 414, 45 1.4 x2 and now a Cowley 75 CDT