|
||
|
||
|
![]() |
#1 |
Newbie
MG Join Date: Jun 2014
Location: York
Posts: 29
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() I have a 2001 ZT 160.
Would it matter if I replaced the rear discs with non-vented discs? Currently they are vented but they need replacing with the pads - when I got the parts from Rimmer Bros I’d ordered non-vented? Certainly don’t drive the car hard but other than needing cooling properties, would there be any fitment issues and caliper problems as I realise the vented discs are obviously thicker. If so I’ll have to return and swop them Thanks in advance |
![]() |
![]() |
![]() |
#2 |
Posted a thing or two
Rover 75 CDTi Saloon & Citroen C1 Join Date: Jun 2016
Location: Oakenshaw, Near Bradford
Posts: 1,615
Thanks: 385
Thanked 552 Times in 328 Posts
|
![]() As long as the dimensions are the same, particularly the thickness, they should be fine, just read it again, you state the vented ones are thicker (understandably) the pads or caliper could be different.
I'm sure someone more in the know will be along shortly
__________________
Rover 75 2.0 CDTi (131Ps) Conn SE Saloon. (Manual) 160 Remap, cruise control, electric window blind, temp gauge, Real walnut / ZT interior, FBH with GSM control. BORN Tuesday, 5th October 2004 @ 12:35:52 This vehicle was the 104,679th 75 to run off the production line, out of 112,381 This vehicle was the 3,318th 75 CDT Connoisseur SE (135) to be made out of 4,744 This vehicle was the 12,440th 75 in Starlight Silver (code: MBB) to be made out of 14,280 Starlight Silver 75s Last edited by Mike Trident; 19th November 2023 at 12:28.. |
![]() |
![]() |
![]() |
#3 | |
Doesn't do things by halves
Rover 75 2.5 Connoisseur Auto (1999) Dealer launch model. Join Date: Mar 2007
Location: Former Middlesex
Posts: 19,979
Thanks: 1,587
Thanked 3,749 Times in 3,181 Posts
|
![]() Quote:
![]() Simon
__________________
"Whatever is rightly done, however humble, is noble." Sir Henry Royce. |
|
![]() |
![]() |
![]() |
#4 |
Posted a thing or two
rover 75 club se Join Date: Apr 2011
Location: Leicester
Posts: 1,414
Thanks: 358
Thanked 419 Times in 310 Posts
|
![]() Does that include caliper carriers as well ...
![]() |
![]() |
![]() |
![]() |
#5 |
Newbie
MG Join Date: Jun 2014
Location: York
Posts: 29
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() Darn it
Thought as much - I’ve ordered vented ones now I’ll send others back - postage costs wasted but hey ho - cheaper than callipers and carriers 😏 |
![]() |
![]() |
![]() |
#6 |
NI/ROI RS
ZT-T 190 / 75 Diesel x3 / 6 door limo / 216 Cabby / Rover 25 van Join Date: May 2009
Location: Antrim
Posts: 8,071
Thanks: 299
Thanked 1,046 Times in 568 Posts
|
![]() Yes, it's the triple unfortunately, discs calipers and carriers all different solid vs vented.
__________________
Cheers, Colin My MG Rover YouTube channel DISCOUNT MTEC BRAKES FOR ALL MG ROVER'S |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|