|
||
|
8th April 2014, 13:40 | #1 |
Loves to post
Rover 75 CDTI Join Date: Feb 2013
Location: Westbury
Posts: 496
Thanks: 11
Thanked 46 Times in 34 Posts
|
Rear windscreen trim retainers
Hi folks.
Having an issue with water ingress in my boot. Definitely coming through the clips that hols the chrome trim under the rear windscreen. Stupidly, I prised them up and broke not 1 but 5. Now I can't get hold of them to replace the broken ones. Can anybody help? Grateful of any assistance. Part number is dcj10090. Regards John
__________________
2004 Rover 75 CDTI facelift saloon White Gold |
8th April 2014, 14:30 | #3 |
Loves to post
Rover 75 CDTI Join Date: Feb 2013
Location: Westbury
Posts: 496
Thanks: 11
Thanked 46 Times in 34 Posts
|
Hi.
Yes, they are the ones. I will give you a pm. Regards John
__________________
2004 Rover 75 CDTI facelift saloon White Gold |
8th April 2014, 14:48 | #4 |
Loves to post
Rover 75 CDTI Join Date: Feb 2013
Location: Westbury
Posts: 496
Thanks: 11
Thanked 46 Times in 34 Posts
|
This forum is superb. 2 clips found, 3 to go.
Anyone got any spare lying around? Thanks John
__________________
2004 Rover 75 CDTI facelift saloon White Gold |
8th April 2014, 16:06 | #5 |
This is my second home
rover 75 1.8 vvc club se wedgwood blue Join Date: Aug 2009
Location: Seaton Carew
Posts: 26,912
Thanks: 65
Thanked 7,142 Times in 4,642 Posts
|
Try Rimmers http://www.rimmerbros.co.uk/Item--i-GRID002000
|
9th April 2014, 06:14 | #6 |
This is my second home
Transit Connect Join Date: Feb 2011
Location: Crewe
Posts: 9,532
Thanks: 868
Thanked 1,619 Times in 1,095 Posts
|
Brit Car sell them at £1.99 each with delivery on ebay.
The part numbers you need have been replaced and are now Dcj000040 and dcj000050 |
9th April 2014, 07:32 | #7 |
Loves to post
Rover 75 CDTI Join Date: Feb 2013
Location: Westbury
Posts: 496
Thanks: 11
Thanked 46 Times in 34 Posts
|
Rimmers are out of stock.
dont suppose you have a link to the eBay ones. I can't find them. Thanks John
__________________
2004 Rover 75 CDTI facelift saloon White Gold |
9th April 2014, 08:02 | #8 | |
Regular poster
2002 MG ZT 190+ (Typhoon), 2004 MG ZT-T 190+ (Starlight Silver) Join Date: Oct 2013
Location: Oldham
Posts: 72
Thanks: 27
Thanked 17 Times in 16 Posts
|
Quote:
Scroll to the bottom of the link provided by Ronnie http://www.rimmerbros.co.uk/Item--i-GRID002000 You will then find the items Rich referred to 'in stock' with Rimmers. Kind regards, Mike |
|
9th April 2014, 10:12 | #9 |
Gets stuck in
MG ZT Join Date: Jun 2011
Location: Oxford
Posts: 847
Thanks: 124
Thanked 312 Times in 147 Posts
|
You do realise that to fit these clips along the bottom the rear windscreen needs to be removed?
They are used to locate the screen within the aperture. They are also very weak, and if any of your clips are able to rotate at all, then they are broken. Also, when fitting new ones, just press the centre pin in with your fingers, do not hit them, or force them in any way, as this will cause the square pin on the back of the clip to break away from the rest of it. It's also highly advisable to smear some windscreen adhesive/sealant around the back and on top of the centre pin whilst fitting them, as the original clips rely on a pathetic piece of foam to prevent water ingress into the boot which deteriorates over time. Any one who claims these can be fitted with the screen in place is entirely misguided, I have been there and attempted it, and it will be impossible without modifying or damaging the new clip. You need two DCJ100180 (which have two white bits of rubber on each clip) and three DCJ100190. The clips are both the same, except for the rubber bits, so you could order five DCJ100180 and remove the white bits. The smaller clips around the window (DCC100350) DCC100350) can be removed and refitted with the window in place, but will not cause leaks because they don't fit through a hole in the body, but on to a post welded to the body. DCJ100180 Last edited by neilbaker86; 9th April 2014 at 10:17.. |
9th April 2014, 10:22 | #10 | |
This is my second home
Transit Connect Join Date: Feb 2011
Location: Crewe
Posts: 9,532
Thanks: 868
Thanked 1,619 Times in 1,095 Posts
|
Quote:
I have done it to several members cars now. Yes the clips require modifying, but only slightly. Plus the part numbers you quote have been superseded by the ones in my earlier post. The rest is sound advice. |
|
|
|