Headlight thumb wheel not working - Page 2

Mischief · 19th January 2019, 12:17

Been to the breakers yard and pulled a LSM from a 75, plugged it into my car and the thumb wheel works. Issue is as we know the miles are in the LSM so will have to get it programmed, should be ok for the MOT though.

klarzy · 19th January 2019, 17:34

Quote:

Originally Posted by Mischief

Been to the breakers yard and pulled a LSM from a 75, plugged it into my car and the thumb wheel works. Issue is as we know the miles are in the LSM so will have to get it programmed, should be ok for the MOT though.

Keep the old pcb and just change the switch panel... it pops off and is connected by a simple ribbon cable... no need to reprogram...

That is of it is the actual switch and not an element on the board...

Mischief · 19th January 2019, 18:02

Quote:

Originally Posted by klarzy

Keep the old pcb and just change the switch panel... it pops off and is connected by a simple ribbon cable... no need to reprogram...

That is of it is the actual switch and not an element on the board...

Its the main board, I tried just changing the front switch panel and it was the same. I have had it under a magnifier and have spotted a slight bit of corrosion on one via and trace, may just need a quick patch to fix it.

19th January 2019, 12:17	#11
Mischief I really should get out more....... Rover 75 Join Date: Jul 2012 Location: Willenhall Posts: 2,897 Thanks: 181 Thanked 340 Times in 264 Posts	Been to the breakers yard and pulled a LSM from a 75, plugged it into my car and the thumb wheel works. Issue is as we know the miles are in the LSM so will have to get it programmed, should be ok for the MOT though. __________________ Regards John [SIGPIC][/SIGPIC] My 75's General Information: This vehicle was the 49,501st 75 to run off the production line, out of 112,381 This vehicle was the 1st 75 1.8 T Club SE to be made out of 3,980 This vehicle was the 1st 75 in Celestial (Special Metallic) (code: IAI) to be made out of 19 Celestial (Special Metallic) 75s

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode