My new 75 saloon

[Dibdob69]

Originally Posted by Arctic

Hi Mark.
Nice colour, good wheels, best leather for that colour car, below are some of the items that from you photo i would be looking at if it was my car while you have the slam panel & bumper off.

1

yellow dots/ intercooler O-rings replaced Viton only. On there way

White dots/ intercooler hose change as it looks swollen.

orange dots/ condenser looks to be perished so maybe not working as it should, do you have gas in the A/C system ?

red spots/ silver resistor change for a upgrade gold one.

lime green dots/ add a protective rubber to stop the wiring chaffing on the chassis arm.

green/ fuel filter change. Got a new one along with a full service kit

pink/ black block bonnet mod. Done

light blue/ PCV filter change. Got a new one but see picture below

purple inline stat if you need one.

how to's are on here for all the above.

Good luck & progress don't forget ask as many questions you like we are here to help.

PS hopefully sometime this year we can get our Nano meets up and running again you are welcome to come.

Thanks for that Arctic, Little problem with changing the PCV filter, Looks like someone put it back together wrong But a little heat and a little bend should sort it l hope.

[Arctic]

Mark
They are not to expensive new, link below or contact (Mickyboy) i am sure he could find you a good second hand one.

https://www.ebay.co.uk/itm/RANGE-ROV...wAAMXQlgtS9iPb


intercooler pipe.
https://www.ebay.co.uk/itm/ROVER-75-...5/131604439425

[Dibdob69]

Intercooler pipe and Gold resister ordered

Would a new modified PVC be better ?

https://www.ebay.co.uk/itm/ROVER-75-...0AAOSwdz9druRd

[Arctic]

Personally i don't think so i don't like them, there is no filter to stop any large debris should there be any, and they are not fit and forget as some believe, they still need to be cleaned out.

I am not trying to spend your money but another good purchase is the brass T connectors for the injectors, and the plastic ones can go brittle and break.

https://www.dieselcomponentsuk.com/p...s-2x-90-2x-180

1

2

3

[Dibdob69]

Is this the one i need, 3 T's and 1 L ?

https://www.dieselcomponentsuk.com/p...cylinder-brass

[Arctic]

Mark
Yes its the same as the one i linked to they have just put it under a different heading, i note they do that with quite a few items, there will be enough hose to replace any vacuum hose coming from the EGR solenoid that may be chaffing or holed.

1

2

check them while you are in the engine bay and have the manifold off.