|
||
|
||
|
![]() |
#1 |
Newbie
Rover 75 Join Date: Nov 2022
Location: Newcastle
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() Hi. A garage has put a new tensioner on rover 75 diesel but keeps loosing the belt. I can move the tensioner very easy with a 24mm spanner and it doesn't return or have any pressure. Is it the back awkward part that should be replaced again or the arm. They had 2nuts holding arm into tensioner which I thought was unusual. Thanks for any replys. I have looked around the forum but unsure what I'm looking for 🤣
|
![]() |
![]() |
![]() |
#2 | |
I really should get out more.......
75 CDT SE 160 Saloon Join Date: May 2017
Location: Thorpe St Andrew, Norwich
Posts: 2,712
Thanks: 1,386
Thanked 1,096 Times in 774 Posts
|
![]() Quote:
When mine started losing the belt it was the crank pulley that was the issue.
__________________
Glutton for punishment --- Previously ... 2.6 SD1 x 2, 3.5 SD1, 820S, 820Si x2, 216 Gsi, 220T saloon, 414, 45 1.4 x2 and now a Cowley 75 CDT ![]() |
|
![]() |
![]() |
![]() |
#3 |
Newbie
Rover 75 Join Date: Nov 2022
Location: Newcastle
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() I have a crank pulley to replace also. I'm just unsure if the tensioner has a return position as I can literally move it around anywhere with little resistance and it doesn't return.
|
![]() |
![]() |
![]() |
#4 | |
Give to Learn
Freelander 2 Join Date: Aug 2010
Location: West Midlands
Posts: 18,816
Thanks: 1,155
Thanked 6,407 Times in 3,874 Posts
|
![]() [QUOTE]
Quote:
Hi Stuart. Welcome to the club /mad house. Have a good read of this thread, and don't take it back to the same garage if you cannot do the job yourself. https://www.the75andztclub.co.uk/for...d.php?t=320533
__________________
Arctic Givology Learn to Give Everything is Achievable ad altiora tendo. Check out our Nano meet dates http://www.midlandsnanomeets.co.uk/ http://www.the75andztclub.co.uk/index.php?thepage=howto " You do the work , we supply the expertise " |
|
![]() |
![]() |
![]() |
#5 |
Newbie
Rover 75 Join Date: Nov 2022
Location: Newcastle
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() Thanks for the welcome 👍. I'm usually pretty savvy when repairing cars but this 75 is a head scratcher too me lol. I can freely move tensioner as there is very little resistance. Im assuming at the back of the block the spring load is broken. I'm gonna give the threat a good read when time permits. Cheers
|
![]() |
![]() |
![]() |
#6 |
Posted a thing or two
Rover 75 2.0 cdi Join Date: Mar 2011
Location: Newcastle upon Tyne
Posts: 1,897
Thanks: 401
Thanked 448 Times in 303 Posts
|
![]() Sounds very much like a faulty tensioner .
|
![]() |
![]() |
![]() |
|
|