FBH pcb repairs

Mansfield · 29th October 2021, 00:03

Start of this year I noticed my fbh wasn't working correctly, after fitting a new pump in the rear, I then had the pcb sent off for a repair, get the board back test it and it works.

Now winters arriving I've tested the burner again and it wouldn't fire up, proceeded to remove the fuse for 30 mins and retry, all works spot on, tried again later than day, worked again. Following morning when the car was flat cold, wouldn't fire. Try a quick 2 min fuse reset, still refused to fire. Runs for around 2mins 10 seconds.

The unit has never been serviced, I sent the unit to webastorepairs.co.uk and they sent me it back "fixed". Does this sound like a pcd issue or would a service help the issue. or are there any other tests to carry out.

Also does anyone know of any reputable pcb services

Regards

Sent from my SM-G981B using Tapatalk

29th October 2021, 00:03	#1
Mansfield Regular poster Rover 75 Saloon Join Date: Feb 2012 Location: Wakefield Posts: 82 Thanks: 1 Thanked 26 Times in 14 Posts	FBH pcb repairs Start of this year I noticed my fbh wasn't working correctly, after fitting a new pump in the rear, I then had the pcb sent off for a repair, get the board back test it and it works. Now winters arriving I've tested the burner again and it wouldn't fire up, proceeded to remove the fuse for 30 mins and retry, all works spot on, tried again later than day, worked again. Following morning when the car was flat cold, wouldn't fire. Try a quick 2 min fuse reset, still refused to fire. Runs for around 2mins 10 seconds. The unit has never been serviced, I sent the unit to webastorepairs.co.uk and they sent me it back "fixed". Does this sound like a pcd issue or would a service help the issue. or are there any other tests to carry out. Also does anyone know of any reputable pcb services Regards Sent from my SM-G981B using Tapatalk