Rover 75 airbag light yawn - Page 3

stevestrat · 7th February 2021, 10:25

With both ZTs I went down the solder/heatshrink route but also added about 6" of wire to avoid the wiring being affected by seat movement. Never had a problem since. With the added wire if I ever have to cut them to remove a seat wouldn't be an issue.

Arctic · 7th February 2021, 13:11

Quote:

Originally Posted by Mr Toad

Steve the connectors you referred to are now out of stock do you know of any alternative supplers as although iI replaced the connectors with bullit connectors the light is still coming on, I think they need better connectors and the wires soldered.

Thanks
Martin

Hi Martin.
Click the link below.

https://www.ebay.co.uk/itm/240Pcs-12...QAAOSwTwZfu5FE

7th February 2021, 10:25	#21
stevestrat This is my second home ZT260 #243 (resting) Join Date: May 2010 Location: Prestonpans Posts: 22,478 Thanks: 650 Thanked 4,624 Times in 3,358 Posts	With both ZTs I went down the solder/heatshrink route but also added about 6" of wire to avoid the wiring being affected by seat movement. Never had a problem since. With the added wire if I ever have to cut them to remove a seat wouldn't be an issue. __________________ Steve T4 Location Map Last edited by stevestrat; 7th February 2021 at 10:27..