Harmon Kardon amp questions

75er · 20th September 2012, 17:11

Can anyone help with a few questions about Harmon Kardon amps please, I can't find the answers on the forum.

Which number HK amp is the correct one for a Hi line tourer?
If you upgrade the radio tuner to BM 24/54 does the same amp do?
What is the difference between the amps for the hi line and non hi line version?

Does anyone know of anyone / a company who could to retrofit one and the sub, I know the loom is a bit complicated to make up, I'm not sure if I'm brave enough!

Thanks

crashmarks · 20th September 2012, 18:11

The tourer highline amp is XQK 100310. I fitted one to mine recently. I made the loom after buying two cheap parot type kits which had the right ends and extending them to suit. Its not difficult as long as your methodical one wire ata time following diagrams that are available on this site.

Canonite · 20th September 2012, 18:19

Not sure how the Tourer set up is but I retrofitted the HK into my saloon with Highline.
Was fairly straightforward as long as you over familiarise yourself with the wiring via the diagrams.

20th September 2012, 17:11	#1
75er Avid contributor Rover 75 Connie SE Tourer cdti Join Date: Jun 2008 Location: Plymouth Posts: 165 Thanks: 29 Thanked 25 Times in 19 Posts	Harmon Kardon amp questions Can anyone help with a few questions about Harmon Kardon amps please, I can't find the answers on the forum. Which number HK amp is the correct one for a Hi line tourer? If you upgrade the radio tuner to BM 24/54 does the same amp do? What is the difference between the amps for the hi line and non hi line version? Does anyone know of anyone / a company who could to retrofit one and the sub, I know the loom is a bit complicated to make up, I'm not sure if I'm brave enough! Thanks

20th September 2012, 18:11	#2
crashmarks Loves to post Rover 75 Connoisseur SE Tourer Auto Join Date: Feb 2010 Location: Wakefield Posts: 408 Thanks: 12 Thanked 8 Times in 8 Posts	The tourer highline amp is XQK 100310. I fitted one to mine recently. I made the loom after buying two cheap parot type kits which had the right ends and extending them to suit. Its not difficult as long as your methodical one wire ata time following diagrams that are available on this site.

20th September 2012, 18:19	#3
Canonite This is my second home BMW 330d Tourer, MG ZT 180 SE XPG, VW Polo 6R 1.2 TDI Bluemotion Join Date: Jul 2011 Location: York Posts: 6,022 Thanks: 363 Thanked 574 Times in 319 Posts	Not sure how the Tourer set up is but I retrofitted the HK into my saloon with Highline. Was fairly straightforward as long as you over familiarise yourself with the wiring via the diagrams.