Go Back   The 75 and ZT Owners Club Forums > The 75 and ZT Owners Club Forums > Technical Help Forum
Register FAQ Image Gallery Members List Calendar Mark Forums Read
Notices

Reply
 
Thread Tools Display Modes
Old 1st October 2019, 08:17   #1
BRG75
Gets stuck in
 
BRG75's Avatar
 
Rover 75 Saloon & Tourer, 9th & 10th Rovers

Join Date: Nov 2013
Location: Sevenoaks
Posts: 971
Thanks: 670
Thanked 290 Times in 195 Posts
Default How to identify a cooling fan type

I would like to thank SD1too, who has vetted this content for accuracy, and added a few comments for completeness.

Whilst this site contains a wealth of information on cooling fans, may I suggest that for newcomers (or nearly new, like myself) some foundation information might help to put the detailed information into context.

I hope that this is not reinventing the wheel, but I was unable to find the basics in one place, and found myself having to piece it together.

TEXT

All Rover 75 / MG ZT's have 2 fans.

The FIRST simply circulates hot / cold air within the cabin, and is better described as a blower fan. It is located behind the dashboard.
This article is NOT about this fan, but it is mentioned, in order to eliminate the sound it makes, and a potential wrong diagnosis.


The SECOND fan is located in front of the radiator, and is a recognised problem area, although with the passage of time, it was, and still can be, made reliable.
The fan has two similtaneous functions, engine cooling and air condition operation. This is of assistance in basic fault diagnosis (excluding the very few cars without air conditioning)

Early cars were fitted with either a 2 speed fan (K series 1.8) or a 3 speed fan (KV6 & Diesel)

The different speeds on these fans were controlled by relays, which switched in additional brushes.
The brushes wore out, particularly the "common" brush, and were (in their day) considered unrepairable.
However, since around 2009, and still the case today, replacement brush sets are available. These appear to have varied in quality / cost, but the brushes from at least one supplier have stood the test of time.

MG Rover then changed the design, so that the fan speed was changed by the switching in or out, of a resistor. Unfortunately, the original resistor (silver coloured) was inadequately specified, resulting again in fan failure, but with different characteristics.

Inevitably, when the cars were current, a failed fan could have been "repaired" by:-

a) Replacement of the correct item, shall we say factory sourced.
b) Replacement of either the correct or incorrect item, say breakers yard sourced.
c) Changing from a brush to a resistor speed switched item.
d) Changing to an aftermarket fan, such as Kenlowe.

There is no known introduction / cut off date for the factory change, but it seems that both old and new design fans were factory fitted around 2002 and 2003. There are also reports to suggest that this continued to the end of production.

Regarding replacement brushes for the earlier units, it is not known (to the writer) if both 2 and 3 speed versions used the same brushes.

October 23rd - An article today, with photographs, strongly points to the brushes being the same dimensions.

However, following a phone call yesterday, a set of 4 brushes (3 speed) are available from "Engineering Carbon Products" who still list them on their website.
If the 2 speed units do indeed use the same brushes, they will now sell a set of 3.
If the brushes are different, they can still manufacture replacements from a pattern, or dimensions.

It should also be noted that when the resistor fans came out, all variations were fitted with 2 speed units.

In summary, it is essential to know what fan is presently fitted to your car, before reading up on the (very detailed) test procedures to be found on this club site.

Early 2 speed (3 wires, take off front bumper to identify)
Early 3 speed (4 wires, take off front bumper to identify)

Later 2 speed (2 wires, resistor visible at 2 o'clock, through radiator grille)

Any Silver resistors should be replaced with a Gold one.

I hope that this is of assistance

BRG75
__________________
Presently
2004 75 CDTi auto Connoisseur Tourer - White Gold
2001 75 2.5 auto Connoisseur Saloon - White Gold

Previously
2002 75 1.8 auto Club SE,
2000 75 1.8 auto Classic SE (Company Car)
1997 420 (Company Car)
1996 216 cabriolet,
198? 213 VDP
1986 SD1 V8 VDP,
1968 2000TC,
1966 2000.

Last edited by BRG75; 23rd October 2019 at 06:04.. Reason: Later information has come available
BRG75 is offline   Reply With Quote
Old 23rd October 2019, 07:23   #2
Arctic
Give to Learn
 
Arctic's Avatar
 
Freelander 2

Join Date: Aug 2010
Location: West Midlands
Posts: 18,651
Thanks: 1,155
Thanked 6,407 Times in 3,874 Posts
Default

Hi Mike.
All the fans use four brushes, 1.8 2.0 2.5 & diesel, not all the late cars came out of the factory with 2 speed units, therefore your (It should also be noted that when the resistor fans came out, the all variations were fitted with 2 speed units.) will not be true I have seen 2004, 54, 05, 55, and 1 2006 with a four wire 3 speed fan, all on diesel cars.

I will be tacking a diesel fan off today, which I will open up at a later today or possibly tomorrow.

This thread will help the member have all the information to work out which fan they may have on their car nice idea Arctic.
__________________
Arctic
Givology Learn to Give
Everything is Achievable

ad altiora tendo.

Check out our Nano meet dates
http://www.midlandsnanomeets.co.uk/

http://www.the75andztclub.co.uk/index.php?thepage=howto

" You do the work , we supply the expertise "
Arctic is offline   Reply With Quote
Old 23rd October 2019, 07:49   #3
SD1too
Doesn't do things by halves
 
SD1too's Avatar
 
Rover 75 2.5 Connoisseur Auto (1999) Dealer launch model.

Join Date: Mar 2007
Location: Former Middlesex
Posts: 20,265
Thanks: 1,587
Thanked 3,749 Times in 3,181 Posts
Default

Quote:
Originally Posted by Arctic View Post
All the fans use four brushes ...
Hi Steve,

What about a 2 speed, 3 wire motor fitted to a 1.8 engine? I thought that used only three brushes?

Simon
__________________
"Whatever is rightly done, however humble, is noble."
Sir Henry Royce.
SD1too is offline   Reply With Quote
Old 23rd October 2019, 08:00   #4
Arctic
Give to Learn
 
Arctic's Avatar
 
Freelander 2

Join Date: Aug 2010
Location: West Midlands
Posts: 18,651
Thanks: 1,155
Thanked 6,407 Times in 3,874 Posts
Default

Quote:
Quote:
Originally Posted by SD1too View Post
Hi Steve,

What about a 2 speed, 3 wire motor fitted to a 1.8 engine? I thought that used only three brushes?

Simon
Hi Simon.
All the fans have four brushes as you can see from the one I opened Monday

1

2

3

4

All four brushes were used & burned .
5
__________________
Arctic
Givology Learn to Give
Everything is Achievable

ad altiora tendo.

Check out our Nano meet dates
http://www.midlandsnanomeets.co.uk/

http://www.the75andztclub.co.uk/index.php?thepage=howto

" You do the work , we supply the expertise "
Arctic is offline   Reply With Quote
Old 23rd October 2019, 08:10   #5
SD1too
Doesn't do things by halves
 
SD1too's Avatar
 
Rover 75 2.5 Connoisseur Auto (1999) Dealer launch model.

Join Date: Mar 2007
Location: Former Middlesex
Posts: 20,265
Thanks: 1,587
Thanked 3,749 Times in 3,181 Posts
Default

Thanks for the pictures Steve. I have two questions about them.
  1. I can't see a brush in the holder at the eight o'clock position but I do see the braid. Had the brush worn to nothing?
  2. To which colour wire is the fourth brush connected please?
Thanks Steve.

Simon
__________________
"Whatever is rightly done, however humble, is noble."
Sir Henry Royce.
SD1too is offline   Reply With Quote
Old 23rd October 2019, 13:05   #6
BRG75
Gets stuck in
 
BRG75's Avatar
 
Rover 75 Saloon & Tourer, 9th & 10th Rovers

Join Date: Nov 2013
Location: Sevenoaks
Posts: 971
Thanks: 670
Thanked 290 Times in 195 Posts
Default

Thanks for your response, Arctic.

I think that your experience of early fans on later cars, ties in totally with what SD1too advised me of, when he vetted my original text. I covered it in para. 9, reproduced below :-

There is no known introduction / cut off date for the factory change, but it seems that both old and new design fans were factory fitted around 2002 and 2003. There are also reports to suggest that this continued to the end of production.

My thought was that the factory may well have been using up old / new stock.
I didn't mention that in the final draft, as it was only supposition on my part.

I should add that I'm a newbie as far as maintaining a 75 is concerned.
Indeed it is because I suspect that I have issues with my car's fan assembly, that I started to research the subject, resulting in the "how to" that I wrote; for my own benefit, initially.

Regards

Mike
__________________
Presently
2004 75 CDTi auto Connoisseur Tourer - White Gold
2001 75 2.5 auto Connoisseur Saloon - White Gold

Previously
2002 75 1.8 auto Club SE,
2000 75 1.8 auto Classic SE (Company Car)
1997 420 (Company Car)
1996 216 cabriolet,
198? 213 VDP
1986 SD1 V8 VDP,
1968 2000TC,
1966 2000.
BRG75 is offline   Reply With Quote
Old 23rd October 2019, 19:37   #7
Arctic
Give to Learn
 
Arctic's Avatar
 
Freelander 2

Join Date: Aug 2010
Location: West Midlands
Posts: 18,651
Thanks: 1,155
Thanked 6,407 Times in 3,874 Posts
Default

Quote:
Quote:
Originally Posted by SD1too View Post
Thanks for the pictures Steve. I have two questions about them.
  1. I can't see a brush in the holder at the eight o'clock position but I do see the braid. Had the brush worn to nothing?
  2. To which colour wire is the fourth brush connected please?
Thanks Steve.

Simon
Hi Simon.
Yes the brush had worn to nothing and was burnt off.

The forth brush is connected to the purple I think.

These photo's are from 2014 which may help more as they are clear.
1

2

3
__________________
Arctic
Givology Learn to Give
Everything is Achievable

ad altiora tendo.

Check out our Nano meet dates
http://www.midlandsnanomeets.co.uk/

http://www.the75andztclub.co.uk/index.php?thepage=howto

" You do the work , we supply the expertise "
Arctic is offline   Reply With Quote
Old 24th October 2019, 08:00   #8
SD1too
Doesn't do things by halves
 
SD1too's Avatar
 
Rover 75 2.5 Connoisseur Auto (1999) Dealer launch model.

Join Date: Mar 2007
Location: Former Middlesex
Posts: 20,265
Thanks: 1,587
Thanked 3,749 Times in 3,181 Posts
Default

Thanks for the pictures Steve but I'm still not clear how it works with four brushes. Do you have a spare board that you could send to me?

Simon
__________________
"Whatever is rightly done, however humble, is noble."
Sir Henry Royce.
SD1too is offline   Reply With Quote
Old 24th October 2019, 13:47   #9
Arctic
Give to Learn
 
Arctic's Avatar
 
Freelander 2

Join Date: Aug 2010
Location: West Midlands
Posts: 18,651
Thanks: 1,155
Thanked 6,407 Times in 3,874 Posts
Default

Quote:
Quote:
Originally Posted by SD1too View Post
Thanks for the pictures Steve but I'm still not clear how it works with four brushes. Do you have a spare board that you could send to me?

Simon
Hi Simon.
Drop me a PM with your full name & address then I will post out these two boards for you, a 1.8 & a four wire 3 speed diesel both have burnt out.
Attached Images
File Type: jpg SDC12848.jpg (128.6 KB, 17 views)
File Type: jpg SDC12850.jpg (127.3 KB, 15 views)
__________________
Arctic
Givology Learn to Give
Everything is Achievable

ad altiora tendo.

Check out our Nano meet dates
http://www.midlandsnanomeets.co.uk/

http://www.the75andztclub.co.uk/index.php?thepage=howto

" You do the work , we supply the expertise "
Arctic is offline   Reply With Quote
Old 24th October 2019, 16:35   #10
SD1too
Doesn't do things by halves
 
SD1too's Avatar
 
Rover 75 2.5 Connoisseur Auto (1999) Dealer launch model.

Join Date: Mar 2007
Location: Former Middlesex
Posts: 20,265
Thanks: 1,587
Thanked 3,749 Times in 3,181 Posts
Default

Thanks Steve. PM sent.

Simon
__________________
"Whatever is rightly done, however humble, is noble."
Sir Henry Royce.
SD1too is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 21:09.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © 2006-2023, The Rover 75 & MG ZT Owners Club Ltd