|
||
|
24th July 2022, 07:36 | #1 |
Gets stuck in
Rover 75 Tourer Join Date: Mar 2022
Location: Chesterfield
Posts: 672
Thanks: 206
Thanked 69 Times in 53 Posts
|
Parking Sensor Quandary
Why are things never straightforward?
After buying my 75 (mk2), I soon realised that there was no 'lights left on' chime, and also that there was no chime from the seat memory. I became aware that the parking sensors also used the same sounder in the IPK, but mine were using a separate sounder affixed to the D-pillar. I assumed that someone had managed to wire a sounder into the PDC module, as the one in the IPK obviously wasn't working. I have just had my IPK repaired by Rick, as the display was failing and he also replaced the sounder. The chime for lights left on and seat memory is now working as intended. On trying the parking sensors, I'm getting a long beep when selecting reverse, but nothing else. The sounder at the back is still beeping away, as it did before. Trying to figure out what is going on, I looked at the sensors. My sensors don't look like the OE sensors that I've seen online. This leads me to believe that an aftermarket parking sensor kit has been fitted, due to the IPK sounder not working. I haven't removed my rear bumper - yet - so I don't know if the original sensors are anywhere to be found. The question is, what to do next? Do I try to restore the original system? This could involve sourcing a lot of parts. If I retain the current system, how do I stop the long error beep every time I select reverse? Do I just disconnect the PDC module, or is that going to create other problems? Anyone have any ideas? |
24th July 2022, 08:34 | #2 |
This is my second home
rover 75 1.8 vvc club se wedgwood blue Join Date: Aug 2009
Location: Seaton Carew
Posts: 26,918
Thanks: 65
Thanked 7,142 Times in 4,642 Posts
|
Could be aftermarket Cisbo sensors, if so, just replace them, only a tenner or so 😎
Sent from my SM-A326B using Tapatalk Here's mine Last edited by suzublu; 24th July 2022 at 08:41.. |
24th July 2022, 08:42 | #3 | |
Gets stuck in
Rover 75 Tourer Join Date: Mar 2022
Location: Chesterfield
Posts: 672
Thanks: 206
Thanked 69 Times in 53 Posts
|
Quote:
The issue is the error beep that I’m getting now that the IPK sounder is working again. I’m assuming that is because the original sensors have probably been disconnected from the PDC module. |
|
24th July 2022, 08:58 | #4 |
This is my second home
Rover 75 CDT Manual Connoisseur SE, Rover 75 CDT Automatic Connoisseur SE & a Freelander Td4. Join Date: Jul 2009
Location: Hampshire
Posts: 11,547
Thanks: 3,470
Thanked 3,119 Times in 2,247 Posts
|
Try sending Big Russ a PM - I'm sure he'll know. I'd guess if you changed the ZCS coding then the car will think it doesn't have PDC and so won't sound the alarm when reverse is selected.
|
24th July 2022, 09:46 | #5 |
Gets stuck in
" NOW SOLD" :-( Rover 75 Conni Auto SE Join Date: Feb 2011
Location: Stoke
Posts: 896
Thanks: 424
Thanked 214 Times in 163 Posts
|
When you select reverse. Is it constantly sounding. Ie; a sensor is down. Or are you saying it dosnt chime (one beep) when you select reverse.. If th latter, and it beeps its correct. If is continuous you av to find a quiet place and listen very carefully to ALL th senders induvidualy to find which one isnt clicking. Then replace th faulty one.
__________________
[SIGPIC][/SIGPIC] |
24th July 2022, 10:22 | #6 |
Give to Learn
Freelander 2 Join Date: Aug 2010
Location: West Midlands
Posts: 18,709
Thanks: 1,155
Thanked 6,407 Times in 3,874 Posts
|
Hi Dave.
Have a look at the module, right hand side in the boot, see if it is plugged in. 1 2 3 Remove the amp. 4 5 Then the bracket. 6 7 8 you will find it bolted to the top. 9 10 11 12 Still need to do the how to on this yet
__________________
Arctic Givology Learn to Give Everything is Achievable ad altiora tendo. Check out our Nano meet dates http://www.midlandsnanomeets.co.uk/ http://www.the75andztclub.co.uk/index.php?thepage=howto " You do the work , we supply the expertise " |
24th July 2022, 10:32 | #7 | |
Gets stuck in
Rover 75 Tourer Join Date: Mar 2022
Location: Chesterfield
Posts: 672
Thanks: 206
Thanked 69 Times in 53 Posts
|
Quote:
I’ll have a look when I get a minute. If it’s not plugged in, I’m guessing that plugging it in will still give me an error if the sensors aren’t there. …or, if it is plugged in, will unplugging it stop the error beep, or will it just beep with a different error? |
|
24th July 2022, 10:49 | #8 | ||
Give to Learn
Freelander 2 Join Date: Aug 2010
Location: West Midlands
Posts: 18,709
Thanks: 1,155
Thanked 6,407 Times in 3,874 Posts
|
Quote:
Error beep could be the wiring also.
__________________
Arctic Givology Learn to Give Everything is Achievable ad altiora tendo. Check out our Nano meet dates http://www.midlandsnanomeets.co.uk/ http://www.the75andztclub.co.uk/index.php?thepage=howto " You do the work , we supply the expertise " |
||
24th July 2022, 11:50 | #9 | |
Gets stuck in
Rover 75 Tourer Join Date: Mar 2022
Location: Chesterfield
Posts: 672
Thanks: 206
Thanked 69 Times in 53 Posts
|
Quote:
How much of the original is still there, I have yet to establish. It might just be the sensors which are missing, or it could be the module as well. Whatever it is, it wasn’t causing an error beep before, as the sounder didn’t work. Last edited by daveo138; 24th July 2022 at 11:53.. |
|
25th July 2022, 13:14 | #10 |
Gets stuck in
MG ZT 260, Rover 75 Connie SE auto Join Date: Feb 2013
Location: Redruth
Posts: 984
Thanks: 1,324
Thanked 399 Times in 271 Posts
|
Very useful thread for me at the moment. When I engage reverse, sometimes a continuous tone, sometimes working normally. Will have a look at all the suggestions at the weekend. Parking sensors are OK to a point, but I always seem to be parking in such tight spots I'd like a parking sensor 'kill switch' lol. There are enough beeps in modern life as it is!
|
|
|