Diesel Cruise Control Loom? - Page 2

Mischief · 27th August 2013, 20:35

It's not impossible mate as anything can be retrofitted

just takes a bit of research PM me your email address I will send you something that may help.

John

DaveyC · 27th August 2013, 21:08

Quote:

Originally Posted by sworks

When retro fitting cruise to Marmite there were two plugs wrapped in foam behind the strip where the switches are fitted. The ecu connector was taped into the loom that goes to the bcm. You don't need to pull the glovebox out to see this, just lower the passenger fuse box cover.

I've had all the facia out now and there are no plugs. Will have a look under the glove box / fuse box but not holding out much hope.

Cheers,

Dave

Arctic · 28th August 2013, 08:28

Dave
have you taken out the A/C control facia off then screws pull this forward and look to the left to see if it there wrapped in foam, i would have thought they should be there on a ZT-T MG diesel Arctic

oldcarguy · 28th August 2013, 10:03

Get yourself to a nano meet and ask the guys have a look.

DaveyC · 28th August 2013, 11:10

Steve,

I have these pics and it seems I have nothing????

Lots of pics. Hopefully someome can spot something I have missed.

Duotone · 28th August 2013, 12:01

This is one of the plugs you are looking for.

I can't see anything like it in your pictures, so I guess you have not got the loom.

Your only course is to cut a loom out of a scrap diesel, no mean feat, but possible.

Dave T

DaveyC · 28th August 2013, 13:31

Thanks Dave. mine does not look like that and I don't have capabilities or time to cut out and solder looms, etc. Looks like I'm selling the setup on to someone.

If anyone is interested...........

Arctic · 28th August 2013, 14:31

Quote:

Originally Posted by DaveyC

Thanks Dave. mine does not look like that and I don't have capabilities or time to cut out and solder looms, etc. Looks like I'm selling the setup on to someone.

If anyone is interested...........

Dave on the 9th photo can you see the blue blocks tapped up you may need to search along the looms to see if thay are there but easiest way is to take out the A/C control and see if you can find the wires for the heated seat switches etc the cruise switch loom would be with those, just seems stange that the wiring is not there or at least it's not visable at the moment Arctic

DaveyC · 28th August 2013, 14:44

Quote:

Originally Posted by Arctic

Dave on the 9th photo can you see the blue blocks tapped up you may need to search along the looms to see if thay are there but easiest way is to take out the A/C control and see if you can find the wires for the heated seat switches etc the cruise switch loom would be with those, just seems stange that the wiring is not there or at least it's not visable at the moment Arctic

Hi Steve,

I had the lot out but you may be able to find it better than me........ Its like a game of hide & seek!

Just negotiating on a FBH setup at the moment too..... I must be a sucker for punishment!!

Mischief · 28th August 2013, 15:51

Don't sell anything yet we can look at the meet many will know exactly where to look and will be able to advise you on the spot

try and catch arctic between cars

John

27th August 2013, 20:35	#11
Mischief I really should get out more....... Rover 75 Join Date: Jul 2012 Location: Willenhall Posts: 2,897 Thanks: 181 Thanked 340 Times in 264 Posts	It's not impossible mate as anything can be retrofitted just takes a bit of research PM me your email address I will send you something that may help. John __________________ Regards John [SIGPIC][/SIGPIC] My 75's General Information: This vehicle was the 49,501st 75 to run off the production line, out of 112,381 This vehicle was the 1st 75 1.8 T Club SE to be made out of 3,980 This vehicle was the 1st 75 in Celestial (Special Metallic) (code: IAI) to be made out of 19 Celestial (Special Metallic) 75s

28th August 2013, 11:10	#15
DaveyC I really should get out more....... MG ZT-T Diesel Join Date: Jun 2012 Location: Costa-Del-Dudley Posts: 2,432 Thanks: 213 Thanked 259 Times in 204 Posts	Steve, I have these pics and it seems I have nothing???? Lots of pics. Hopefully someome can spot something I have missed. __________________ [SIGPIC][/SIGPIC] Last edited by DaveyC; 28th August 2013 at 11:13.. Reason: Picsadded

28th August 2013, 13:31	#17
DaveyC I really should get out more....... MG ZT-T Diesel Join Date: Jun 2012 Location: Costa-Del-Dudley Posts: 2,432 Thanks: 213 Thanked 259 Times in 204 Posts	Thanks Dave. mine does not look like that and I don't have capabilities or time to cut out and solder looms, etc. Looks like I'm selling the setup on to someone. If anyone is interested........... __________________ [SIGPIC][/SIGPIC]

28th August 2013, 15:51	#20
Mischief I really should get out more....... Rover 75 Join Date: Jul 2012 Location: Willenhall Posts: 2,897 Thanks: 181 Thanked 340 Times in 264 Posts	Don't sell anything yet we can look at the meet many will know exactly where to look and will be able to advise you on the spot try and catch arctic between cars John __________________ Regards John [SIGPIC][/SIGPIC] My 75's General Information: This vehicle was the 49,501st 75 to run off the production line, out of 112,381 This vehicle was the 1st 75 1.8 T Club SE to be made out of 3,980 This vehicle was the 1st 75 in Celestial (Special Metallic) (code: IAI) to be made out of 19 Celestial (Special Metallic) 75s

28th August 2013, 10:03	#14
oldcarguy Posted a thing or two Rover 75 Conn SE Tourer Join Date: Aug 2011 Location: Driffield Posts: 1,952 Thanks: 27 Thanked 151 Times in 125 Posts	Get yourself to a nano meet and ask the guys have a look.

28th August 2013, 12:01	#16
Duotone This is my second home 75 Join Date: Nov 2006 Location: Leeds Posts: 8,432 Thanks: 176 Thanked 907 Times in 716 Posts	This is one of the plugs you are looking for. I can't see anything like it in your pictures, so I guess you have not got the loom. Your only course is to cut a loom out of a scrap diesel, no mean feat, but possible. Dave T