|
||
|
24th July 2022, 13:33 | #1 |
Avid contributor
75 tourer Join Date: Sep 2019
Location: Middlesbrough
Posts: 143
Thanks: 23
Thanked 42 Times in 24 Posts
|
Rear light unit
Wanted rear light unit for a tourer all the clips are broken on mine. Please and thank you
Sent from my SM-G780F using Tapatalk |
24th July 2022, 14:15 | #2 |
This is my second home
rover 75 1.8 vvc club se wedgwood blue Join Date: Aug 2009
Location: Seaton Carew
Posts: 26,911
Thanks: 65
Thanked 7,142 Times in 4,642 Posts
|
You can get a refit kit from eBay, search for bizzy Lizzy on eBay
https://www.ebay.co.uk/itm/134180304...sAAOSw96thZWQX Last edited by suzublu; 24th July 2022 at 14:29.. |
24th July 2022, 14:34 | #3 | |
Give to Learn
Freelander 2 Join Date: Aug 2010
Location: West Midlands
Posts: 18,696
Thanks: 1,155
Thanked 6,407 Times in 3,874 Posts
|
[QUOTE]
Quote:
The above will make no difference if the light lugs are broken 1 2 3 Then you need to repair them 4 5 6 7 And use new fixing that will never need changing again. 8 9 10 Use stainless steel screws to fix light later after repair. 11 12
__________________
Arctic Givology Learn to Give Everything is Achievable ad altiora tendo. Check out our Nano meet dates http://www.midlandsnanomeets.co.uk/ http://www.the75andztclub.co.uk/index.php?thepage=howto " You do the work , we supply the expertise " |
|
24th July 2022, 14:38 | #4 |
This is my second home
rover 75 1.8 vvc club se wedgwood blue Join Date: Aug 2009
Location: Seaton Carew
Posts: 26,911
Thanks: 65
Thanked 7,142 Times in 4,642 Posts
|
Ah right Steve Cancel that then
|
24th July 2022, 14:51 | #5 |
Give to Learn
Freelander 2 Join Date: Aug 2010
Location: West Midlands
Posts: 18,696
Thanks: 1,155
Thanked 6,407 Times in 3,874 Posts
|
Ron they will still work on the pimple heads, but may need a little work with a 5mm drill bit and some vaseline, they go brittle quick so opening them a little makes them last longer
1 2 3 4 https://www.the75andztclub.co.uk/for...63#post1253363
__________________
Arctic Givology Learn to Give Everything is Achievable ad altiora tendo. Check out our Nano meet dates http://www.midlandsnanomeets.co.uk/ http://www.the75andztclub.co.uk/index.php?thepage=howto " You do the work , we supply the expertise " Last edited by Arctic; 24th July 2022 at 14:57.. |
24th July 2022, 16:30 | #6 |
This is my second home
Rover 75 Saloon & Tourer Join Date: Sep 2012
Location: Lincoln
Posts: 14,911
Thanks: 1,630
Thanked 3,032 Times in 2,181 Posts
|
How wide is the hole in the body that is created at the factory?
The hole I am referring to is picture 9 in post 3 macafee2 |
24th July 2022, 19:30 | #7 | |
Give to Learn
Freelander 2 Join Date: Aug 2010
Location: West Midlands
Posts: 18,696
Thanks: 1,155
Thanked 6,407 Times in 3,874 Posts
|
Quote:
I think it's 8mm or 10mm can't remember now
__________________
Arctic Givology Learn to Give Everything is Achievable ad altiora tendo. Check out our Nano meet dates http://www.midlandsnanomeets.co.uk/ http://www.the75andztclub.co.uk/index.php?thepage=howto " You do the work , we supply the expertise " |
|
24th July 2022, 20:44 | #8 |
Avid contributor
75 tourer Join Date: Sep 2019
Location: Middlesbrough
Posts: 143
Thanks: 23
Thanked 42 Times in 24 Posts
|
Thanks very informative. I'll get the kit and getting mending
Sent from my SM-G780F using Tapatalk |
25th July 2022, 09:30 | #9 |
Gets stuck in
Rover 75 Tourer Join Date: Mar 2022
Location: Chesterfield
Posts: 665
Thanks: 206
Thanked 69 Times in 53 Posts
|
I bought the ebay kit, although I haven't used it yet, as I still need to remove the remains of one screw. The plastic sockets have been redesigned, apparently.
When I did the other side, I bought some sockets from X-part. I had read about using a 5mm drill to open them up, but when I measured the ball on the lamp, it was less than 5mm, so I didn't. What I did do was drill a 1.5mm hole at the base of each slot. I'm hoping that will reduce the possibility of it cracking. |
Thread Tools | |
Display Modes | |
|
|