|
|
|
|
|
|
||
|
|
||
14th February 2017, 18:36
|
#1 |
|
Newbie
Rover 75 Saloon, 2.0 CDTi, 131ps, Connoisseur, 2005 Join Date: Jun 2016
Location: CRYMYCH
Posts: 17
Thanks: 15
Thanked 5 Times in 1 Post
|
Central Locking problem
My drivers door cable broke last month and I could not open the door from the inside, my local garage replaced it with a new one, but I have now noticed that the door will not lock with the fob button or the key.
If I push down the knob the door locks but will not open again with the button on the console, only by pulling the inside handle. When I press the fob button all the other doors lock except the drivers door. Do you think that when my local garage repaired the door cable they might have missed a connection somewhere putting the door back together, they are pretty good and have arranged for the car to car back. Or does the lock need to be reprogrammed for the fob? regards, Mark
__________________
Rover 75, "05", 2.0 CDTi 131ps, Connoisseur Edition, First mod to do, "The Plenum's" -Done 2nd: PCV Filter - Done 3rd: Intercooler "O" rings My Vehicle was born at 1606hrs on Thurs 25th February 2005 My vehicle was the 110,462nd 75 to run off the production line, out of 112,381 My vehicle was the 4,513th 75 CDT Connoisseur SE (135) to be made out of 4,744 My vehicle was the 1,282nd 75 in Platinum Gold (code: MCN) to be made out of 1,685 Platinum Gold 75s |
|
|
|
|
Threaded Mode