|
||
|
15th April 2013, 14:45 | #1 |
This is my second home
Rover 75 2.0 Litre Club Saloon Join Date: Nov 2006
Location: S
Posts: 3,280
Thanks: 38
Thanked 50 Times in 47 Posts
|
WYE100350 - exhaust joining clamp
Does anyone know the internal diameter of the exhaust clamp p/n WYE100350 (part 14 here - http://www.rimmerbros.co.uk/Item--i-GRID001940)? Is it 50mm or 55mm?
I want to join a new rear silencer (part 10 above) to the existing pipe (minus the old box) but don't fancy paying £42.25 for a pesky clamp - I thought I'd try and use one of these instead: http://www.ebay.co.uk/sch/i.html?_fr..._ipg=200&rt=nc If WYE100350 is 55mm internal diameter, maybe this one would do the trick? http://www.ebay.co.uk/itm/Exhaust-Co...item415ad655c6 |
15th April 2013, 14:56 | #2 |
Gets stuck in
Rover 75 Saloon Join Date: Apr 2008
Location: Atherstone
Posts: 641
Thanks: 2
Thanked 52 Times in 36 Posts
|
WYE100350 is 57mm
__________________
Time is precious. Waste it Wisely ! |
15th April 2013, 15:12 | #3 |
This is my second home
Rover 75 2.0 Litre Club Saloon Join Date: Nov 2006
Location: S
Posts: 3,280
Thanks: 38
Thanked 50 Times in 47 Posts
|
Would this one work then? http://www.ebay.co.uk/itm/Exhaust-Co...item415ad655c6
(60mm open / 56mm closed). |
15th April 2013, 17:36 | #4 |
This is my second home
Hyundai i10 998cc Join Date: Mar 2012
Location: Kilmarnock
Posts: 6,602
Thanks: 2,088
Thanked 2,298 Times in 1,349 Posts
|
These are very good clamps, I used the smaller size (don't remember the actual size) on my Audi 80 when I needed to replace the centre box.
The trick is to use a good quality exhaust assembly paste.
__________________
Cheers from Trevor MM0KJJ |
15th April 2013, 18:51 | #5 |
This is my second home
Rover 75 2.0 Litre Club Saloon Join Date: Nov 2006
Location: S
Posts: 3,280
Thanks: 38
Thanked 50 Times in 47 Posts
|
Any paste in particular Trevor?
|
15th April 2013, 19:17 | #6 |
This is my second home
Hyundai i10 998cc Join Date: Mar 2012
Location: Kilmarnock
Posts: 6,602
Thanks: 2,088
Thanked 2,298 Times in 1,349 Posts
|
Gosh!!!! It's a few years ago now but I seem to remember it was in a red and white squeezy tube.
__________________
Cheers from Trevor MM0KJJ |
16th April 2013, 15:38 | #7 |
This is my second home
Rover 75 2.0 Litre Club Saloon Join Date: Nov 2006
Location: S
Posts: 3,280
Thanks: 38
Thanked 50 Times in 47 Posts
|
Holts Firegum is in a red & white tube - http://www.emotorspares.co.uk/holts-...FWbKtAod-TAADQ
|
16th April 2013, 20:17 | #8 |
This is my second home
1 Join Date: Dec 2010
Location: Banned
Posts: 5,195
Thanks: 528
Thanked 1,022 Times in 786 Posts
|
I use halfords exhaust paste worked well on my decat pipes.
Not that expensive i got mine with my trade card.
__________________
[SIGPIC][/SIGPIC] |
17th April 2013, 18:29 | #9 |
Precise
Rover 75 Tourer 2.5KV6 Connoisseur SE Join Date: Mar 2013
Location: Fleet
Posts: 2,954
Thanks: 630
Thanked 617 Times in 480 Posts
|
The in-pipe for my replacement 75 Tourer rear box is belled out to receive the old centre pipe, slip fit?
|
17th April 2013, 18:40 | #10 | |
This is my second home
Rover 75 2.0 Litre Club Saloon Join Date: Nov 2006
Location: S
Posts: 3,280
Thanks: 38
Thanked 50 Times in 47 Posts
|
Quote:
Last edited by Simon W; 17th April 2013 at 22:16.. |
|
|
|