|
||
|
13th April 2007, 10:38 | #1 |
Regular poster
ZT V8 Join Date: Jan 2007
Location: Tonbridge
Posts: 68
Thanks: 0
Thanked 0 Times in 0 Posts
|
V8 parts only ! or not ?
Hi
I am going to sell these bits but just want to check a couple of things. Is the V8 carpet only for the V8 due to the bigger tunnel, and the front uprights, steering rack, steering UJ, anti roll bar,front cailipers, front damper assemblies front subframe only for V8 as well. As I dont want to list them incorrecttly. Cheers Steve
__________________
http://www.the75andztclub.co.uk/foru...67c1387a36.jpg |
13th April 2007, 11:04 | #2 |
This is my second home
ZT400 Join Date: Oct 2006
Location: Ellesmere
Posts: 5,948
Thanks: 0
Thanked 43 Times in 29 Posts
|
I would err on the side of caution and say V8 only except for the front calipers which are supposed to be the same as the 190 but even that was subject to fair bit of discussion a while ago.
|
13th April 2007, 17:48 | #3 |
Posted a thing or two
TVR Join Date: Dec 2006
Location: West london
Posts: 1,084
Thanks: 0
Thanked 0 Times in 0 Posts
|
i got a pair of front 190 calipers and they are nothing like the ones on my 260.
__________________
Peter Essling Project carbon fibre well under way http://i100.photobucket.com/albums/m.../Logo_260s.gif http://i100.photobucket.com/albums/m...ner468x60b.gif |
13th April 2007, 19:36 | #4 |
This is my second home
ZT400 Join Date: Oct 2006
Location: Ellesmere
Posts: 5,948
Thanks: 0
Thanked 43 Times in 29 Posts
|
See! told you someone had been down that route Steve!
|
22nd April 2007, 21:04 | #5 |
Newbie
ZT-T 260 Join Date: Dec 2006
Location: Sussex
Posts: 20
Thanks: 0
Thanked 0 Times in 0 Posts
|
I thought the calipers were fitted back-to-front, inside-out, upside-down or something like that. They are definately not specific to the 260 as they have B*W cast into them.
|
22nd April 2007, 23:12 | #6 |
Posted a thing or two
TVR Join Date: Dec 2006
Location: West london
Posts: 1,084
Thanks: 0
Thanked 0 Times in 0 Posts
|
the ones i have are totally different, differently cast as well
__________________
Peter Essling Project carbon fibre well under way http://i100.photobucket.com/albums/m.../Logo_260s.gif http://i100.photobucket.com/albums/m...ner468x60b.gif |
23rd April 2007, 09:11 | #7 |
Regular poster
ZT V8 Join Date: Jan 2007
Location: Tonbridge
Posts: 68
Thanks: 0
Thanked 0 Times in 0 Posts
|
Not All Bits V8 Bits Are The Same Either
When Rebuilding The Car, Found Out That I Have Two Different Front Sub Axles, One Had A Thicker Caliper Mounting Lugs Then The Other Which Meant Diffrent Lenght Caliper Bolts Were Needed For The Different Uprights.
Also The Two Cars Had Different Clutch Mounting Brackets Fitted To The Inside Of The Chassis Rails. Cheers Steve
__________________
http://www.the75andztclub.co.uk/foru...67c1387a36.jpg |
|
|