75/ZT Flip Keys - New Group Buy - Page 19

RUSSELLO · 20th August 2013, 05:13

Sorry previous message should have read, is programming these keys a problem?

Bobbybrown · 20th August 2013, 05:25

No, they don't need programming. It's a flip key case, your internals of your original fob goes inside.

kdowson · 20th August 2013, 08:03

Guys, I have just got mine and it works great.
My recommendation is BEFORE ordering find a key cutter in your area (someone who can cut the Rover keys)- its not that easy and you may well like me have had to travel to get there.

Now, compare this with the in my opinion 'BEST ALTERNATIVE'. Ask mischief to get it done for you. If you ask nicely then the electronics may also be swapped over too.
What you get is a smooth and quick service, the guy who cuts the keys makes the machinery for cutting these and so is an 'expert', so why take the risk at others who just may have a problem?

So take the easy way!

Thanks to Bobby for making these available and to mischief (John) for an exceptional service.

Keith

4m4s0 · 24th August 2013, 10:44

Hi! Is there any flipkey with the old logo left?

Bobbybrown · 25th August 2013, 12:40

I have loads of button pieces guys if anyone needs any spares. They don't include the logo and I also have the membrane that includes the round button.

Also have a few of the valeo stickers for the back of the fobs.

Anyone need any of the spares?

theridler · 16th September 2013, 21:02

This works very well. The spring/flip seems to sturdy. Finshed off well with the logos even down to the valeo one o the back... keycutting service from mischief also spot on and VERY prompt! Awesome guys!

chas_1 · 29th November 2013, 16:45

Good eve,
Have you any of these left please.

Regards

Chas

Bobbybrown · 29th November 2013, 17:47

Yeah have 3 or 4 I think.

Windslore · 6th December 2013, 17:04

Received my flip key, very impressed! Internals all swaped over and it works a dream, that's after I managed to pre tension the spring to get the blade to retract again! It may be in the thread somewhere but a tip is to 'bodge' tape the blade to the housing of the flob before you remove the screws that holds it all in place and it does not fly apart!

Do you know when you're going to get the old Rover logos in stock?

Thanks.

Bobbybrown · 6th December 2013, 17:10

Not sure yet, waiting on confirmation myself.

20th August 2013, 05:13	#181
RUSSELLO Regular poster ROVER 75 TOURER OWNED FROM NEW Join Date: May 2012 Location: CHARLTON, SHAFTESBURY Posts: 71 Thanks: 11 Thanked 1 Time in 1 Post	Programming Sorry previous message should have read, is programming these keys a problem?

20th August 2013, 05:25	#182
Bobbybrown Gets stuck in 200 Join Date: Dec 2012 Location: Tamworth Posts: 716 Thanks: 1 Thanked 15 Times in 13 Posts	No, they don't need programming. It's a flip key case, your internals of your original fob goes inside. __________________ Custom Cut Vinyl Decals and Flip Keys

25th August 2013, 12:40	#185
Bobbybrown Gets stuck in 200 Join Date: Dec 2012 Location: Tamworth Posts: 716 Thanks: 1 Thanked 15 Times in 13 Posts	I have loads of button pieces guys if anyone needs any spares. They don't include the logo and I also have the membrane that includes the round button. Also have a few of the valeo stickers for the back of the fobs. Anyone need any of the spares? __________________ Custom Cut Vinyl Decals and Flip Keys

16th September 2013, 21:02	#186
theridler Gets stuck in ZT-T+ CDTi '54 reg Join Date: Oct 2012 Location: Newark Posts: 973 Thanks: 199 Thanked 120 Times in 107 Posts	flip key working well... This works very well. The spring/flip seems to sturdy. Finshed off well with the logos even down to the valeo one o the back... keycutting service from mischief also spot on and VERY prompt! Awesome guys!

29th November 2013, 16:45	#187
chas_1 Regular poster ROVER 75 SALOON Join Date: May 2013 Location: NORTHAMPTON Posts: 70 Thanks: 3 Thanked 6 Times in 2 Posts	flip key Good eve, Have you any of these left please. Regards Chas

20th August 2013, 08:03	#183
kdowson Newbie 75 CDTI tourer Join Date: Apr 2008 Location: Newcastle Posts: 25 Thanks: 0 Thanked 0 Times in 0 Posts	Guys, I have just got mine and it works great. My recommendation is BEFORE ordering find a key cutter in your area (someone who can cut the Rover keys)- its not that easy and you may well like me have had to travel to get there. Now, compare this with the in my opinion 'BEST ALTERNATIVE'. Ask mischief to get it done for you. If you ask nicely then the electronics may also be swapped over too. What you get is a smooth and quick service, the guy who cuts the keys makes the machinery for cutting these and so is an 'expert', so why take the risk at others who just may have a problem? So take the easy way! Thanks to Bobby for making these available and to mischief (John) for an exceptional service. Keith

24th August 2013, 10:44	#184
4m4s0 Newbie Rover 75 Saloon Join Date: Jan 2013 Location: Stockholm Posts: 4 Thanks: 0 Thanked 0 Times in 0 Posts	Hi! Is there any flipkey with the old logo left?

29th November 2013, 17:47	#188
Bobbybrown Gets stuck in 200 Join Date: Dec 2012 Location: Tamworth Posts: 716 Thanks: 1 Thanked 15 Times in 13 Posts	Yeah have 3 or 4 I think. __________________ Custom Cut Vinyl Decals and Flip Keys

6th December 2013, 17:04	#189
Windslore Loves to post MG ZT-T 190 SE, MG ZT 260 SE Join Date: Sep 2010 Location: Bridport Posts: 270 Thanks: 53 Thanked 31 Times in 23 Posts	Received my flip key, very impressed! Internals all swaped over and it works a dream, that's after I managed to pre tension the spring to get the blade to retract again! It may be in the thread somewhere but a tip is to 'bodge' tape the blade to the housing of the flob before you remove the screws that holds it all in place and it does not fly apart! Do you know when you're going to get the old Rover logos in stock? Thanks.

6th December 2013, 17:10	#190
Bobbybrown Gets stuck in 200 Join Date: Dec 2012 Location: Tamworth Posts: 716 Thanks: 1 Thanked 15 Times in 13 Posts	Not sure yet, waiting on confirmation myself. __________________ Custom Cut Vinyl Decals and Flip Keys