|
||
|
28th April 2014, 23:16 | #1 |
Gets stuck in
'54 Black MG ZT CDTi + 160 Join Date: Feb 2013
Location: Blackburn
Posts: 749
Thanks: 24
Thanked 21 Times in 17 Posts
|
2 hole black oak panel for no hole panel
I have a 2 hole black oak dash panel for heated seats, but I would like a panel with no holes if anyone would like to swap?
Thanks.
__________________
|
6th May 2014, 16:56 | #2 |
Avid contributor
2003 MG ZT 190+,(2005 Facelift R75 1.8T SE Conny now consigned to be a donor car) Join Date: Sep 2012
Location: Sidcup
Posts: 149
Thanks: 34
Thanked 4 Times in 4 Posts
|
When are you wanting to do this?
It's only that one of the projects I have in mind for the summer is to swap some seats around so that I have the memory/heated seats from my connie 75 in my ZT. I hadn't realised that I'd have to change the dash... I had assumed the heating would come on automatically according to the outside temperature. I'll have to look at the 75 to see whether there are switches I'm going to need as well.
__________________
Chris. Work on the 1.8T New pads &cs all round, Bonnet Catch Reversed, Plenums Cleaned, Renewed Selected Radiator Hoses, New Stainless Steel Twin Exhaust,Metal T-Piece, Head Skimmed and MLS Head Gasket, New Cambelt & Alternator Belt, New PRT & Water Pump, New Air Duct Hose, New Radiator, New plugs, coil packs & HT leads, Golden Radiator Resistor. Car then blew up and I gave up. Bought the ZT 190 instead ! |
|
|