Breaking now - Page 5

BRG75 · 29th May 2020, 07:20

I notice that the red car in your original photo has a sunroof.

I'm after the electrical plug which connects to the sunroof switch, should it still be there.

Also, if you can follow the part of the loom that it is attached to, can you see one or two relays please?

The reason, is that I have an aftermarket electric sunroof, with a switch using lucar connectors, and wired direct to ign. battery. i.e full current through the switch.

A cct. diagram of the 75 set up that I have, doesn't show any relays.

However, the correct 75 switch (which I already have) doesn't appear heavy enough to drive the sunroof motor, without relays.

So,
1, The plug, for which I'll construct a relay based loom.
or
2, The plug, plus whatever may be attached, for me to keep as original as possible.

Delivered price please, if you can help.

With thanks,

Regards

Mike.

BRG75 · 30th May 2020, 05:51

Last minute thought,

If just the plug (1, above) please leave enough length of wires, for me to solder onto.

About 2 inches, so I can stagger joints.

Thanks

Mike

Ched · 30th May 2020, 19:21

Any news on my want as in post 24 please?

JohnnyBG · 31st May 2020, 16:36

Just on the offchance, I fancy a 17" wheel to replace the spacesaver on my 2004 tourer CDTI Connie. Style unimportant, it just needs to match fit with the others, be scruffy but usable and cheap.

JohnnyBG

2Diesels · 1st June 2020, 06:59

Sorry for the lack of response, I’ve just been far too busy with other stuff in my life. I’ll have a proper read through all the wants & PMs & see if I can do anything to help

2Diesels · 1st June 2020, 12:20

Quote:

Originally Posted by Scouse1958

Hi do you have any 2.5 badges for the 2 front doors

Sorry the only torpedoes I have left are cdt ones

2Diesels · 1st June 2020, 12:21

Quote:

Originally Posted by smudge.g

Would you have an engine under tray, mine on my diesel Tourer is knackered!!

Nope sorry

2Diesels · 1st June 2020, 12:23

Quote:

Originally Posted by Duke96

Hi do you have a good battery for a mg zt cdti

I haven’t but by the time it was parcelled & sent it would nearly outweigh the cost of a new one any way

2Diesels · 1st June 2020, 12:24

Quote:

Originally Posted by StewartIngram

I'm in need of a part for my boot lock. When I insert the key, it will turn but not pull the rod to the lock mechanism. I believe the plastic "lump" on the back of the barrel is worn so that it doesn't rotate properly and pull the rod. I had a quick look yesterday without removing it (whilst doing the push-button mod that actually by-passes the need for a key, but it would be nice to repair it).

Stewart

I know the very bit you mean but sadly not got any of those

2Diesels · 1st June 2020, 12:27

Quote:

Originally Posted by Ched

Hi,

Do you have item 5 in the pic please?
Thanks.

https://rimmerbros.com/Item--i-GRID001959

Sadly not, it’s hard to find good ones now

29th May 2020, 07:20	#41
BRG75 Gets stuck in Rover 75 Saloon & Tourer, 9th & 10th Rovers Join Date: Nov 2013 Location: Sevenoaks Posts: 973 Thanks: 670 Thanked 290 Times in 195 Posts	I notice that the red car in your original photo has a sunroof. I'm after the electrical plug which connects to the sunroof switch, should it still be there. Also, if you can follow the part of the loom that it is attached to, can you see one or two relays please? The reason, is that I have an aftermarket electric sunroof, with a switch using lucar connectors, and wired direct to ign. battery. i.e full current through the switch. A cct. diagram of the 75 set up that I have, doesn't show any relays. However, the correct 75 switch (which I already have) doesn't appear heavy enough to drive the sunroof motor, without relays. So, 1, The plug, for which I'll construct a relay based loom. or 2, The plug, plus whatever may be attached, for me to keep as original as possible. Delivered price please, if you can help. With thanks, Regards Mike. __________________ Presently 2004 75 CDTi auto Connoisseur Tourer - White Gold 2001 75 2.5 auto Connoisseur Saloon - White Gold Previously 2002 75 1.8 auto Club SE, 2000 75 1.8 auto Classic SE (Company Car) 1997 420 (Company Car) 1996 216 cabriolet, 198? 213 VDP 1986 SD1 V8 VDP, 1968 2000TC, 1966 2000. Last edited by BRG75; 29th May 2020 at 07:30..

30th May 2020, 05:51	#42
BRG75 Gets stuck in Rover 75 Saloon & Tourer, 9th & 10th Rovers Join Date: Nov 2013 Location: Sevenoaks Posts: 973 Thanks: 670 Thanked 290 Times in 195 Posts	Last minute thought, If just the plug (1, above) please leave enough length of wires, for me to solder onto. About 2 inches, so I can stagger joints. Thanks Mike __________________ Presently 2004 75 CDTi auto Connoisseur Tourer - White Gold 2001 75 2.5 auto Connoisseur Saloon - White Gold Previously 2002 75 1.8 auto Club SE, 2000 75 1.8 auto Classic SE (Company Car) 1997 420 (Company Car) 1996 216 cabriolet, 198? 213 VDP 1986 SD1 V8 VDP, 1968 2000TC, 1966 2000.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

30th May 2020, 19:21	#43
Ched I really should get out more....... MG ZT V8, MGZT 135 derv ,MG TF 135 Join Date: Dec 2011 Location: Romsey Posts: 2,293 Thanks: 553 Thanked 573 Times in 385 Posts	Any news on my want as in post 24 please?

31st May 2020, 16:36	#44
JohnnyBG Avid contributor ZT-T Join Date: Sep 2019 Location: Teesside Posts: 235 Thanks: 176 Thanked 66 Times in 38 Posts	Just on the offchance, I fancy a 17" wheel to replace the spacesaver on my 2004 tourer CDTI Connie. Style unimportant, it just needs to match fit with the others, be scruffy but usable and cheap. JohnnyBG

1st June 2020, 06:59	#45
2Diesels Trader ZT 260SE, Connoisseur CDT Join Date: Mar 2009 Location: The Ancient Shire Of Bedlington Posts: 12,597 Thanks: 68 Thanked 506 Times in 305 Posts	Sorry for the lack of response, I’ve just been far too busy with other stuff in my life. I’ll have a proper read through all the wants & PMs & see if I can do anything to help